Satin Finish Stainless Steel Sheet - China

Satin Finish Stainless Steel Sheet The Satin surface is evenly distributed with short slender lines which finished by our oil Hairline production line, and the surface of the sheet is bright.

Our standard Satin spec is 150#, we also do the 60#, 120#, 180#, 240#, 320# if customer request.

Generally, the basic material are 201, 304, 316L, 430, 441, 443, and the surface would shown nice metal bright after finish.

Our thickness range is 0.5mm to 3.0mm, and the standard size is 1219x2438mm and 1219x3048mm, what’s more, we could do the special width not more than 1500mm, and special length not more than 6000mm.

Satin surface is neat and beautiful which widely used into kinds of outside decoration of buildings and elevator decoration.

We could do many treatment on the satin surface such as etching, PVD and so on.

The surface would be different and welcomed by customers.

Satin finish also could be done together with other artwork process like bead blasted, vibration, part PVD, part Mirror, etc.

Stain Finish Stainless Steel Sheets, No.

4 Finish Stainless Steel Sheets, Stainless Steel Satin, elevator decoration Stainless Steel Satin

Company Contact:

• Posted By: Shenghe Zhongtai Stainless Steel Co., Ltd.

• Phone: +86-010-87603028

• Address: Room A309 Unit A, Dream Valley, 6th Road, Jinghai, Economic & Technological Development Zone, Yi, Beijing , Beijing , China

• Email:

• Website: https://www.sunsongss.com

• Business Description: Beijing Shenghe Zhongtai Stainless Steel Co., Ltd was established in 2009 and located in Beijing, China.
  
  In the past 9 years, we have focused the Stainless steel material and surface finish.
  
  We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year.
  
  Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co., Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
  
  We have imported the advanced cutting equipment to do the coil cutting and flatting.
  
  And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.
  
  etc.
  
  Especially only we could do the surface treatment for the with more than 1500mm.
  
  And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing.
  
  Our annual outputs has exceeded 3000 mts.
  
  We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.