Aak Takes Over And Meets The Standard With A Machining Allowance Of 0 3mm - China

George comes from a hydraulic valve company in Germany.

He likes to choose old suppliers to place orders.

Some time ago, he placed an order of hydraulic pressure control valve with machining allowance of 0.3mm with an old supplier.

After 3 proofing, his customer still did not approve the samples of the hydraulic pressure control valve.

George was very angry.

Before ordering this hydraulic pressure control valve, he confirmed the parameters with the manufacturer several times, especially the machining allowance of 0.3mm.

The manufacturer guaranteed no problem.

Unexpectedly, the accuracy error of the hydraulic pressure control valve sample was 10% higher, and even after revising samples for 3 times, it still can not meet the machining allowance of 0.3mm.

George has to face the technical shortcomings of the old manufacturer, the sample pushing of the customer, and the situation of no suitable hydraulic pressure control valve manufacturer to make samples.

He contacted the all the hydraulic valve manufacturers cooperated in the past, but none of them was able to make a hydraulic pressure control valve with a machining allowance of 0.3mm.

He kept looking for a new hydraulic pressure control valve manufacturer online and came across AAK hydraulic valve on B2B.

George left a message on our website .

aakindustry.

com: I saw AAK article introducing the hydraulic valve with machining allowance of 0.3mm.

We have a hydraulic pressure control valve requiring machining allowance of 0.3mm.

Can you sample it? For those customers who directly require to make samples like this, basically, they encountered the sample failure from other hydraulic pressure control valve manufacturers.

After communication, we know that his old supplier has failed to deal with the 0.3mm finishing hydraulic pressure control valve samples for 3 times.

After checking George's hydraulic pressure control valve drawings and various parameter descriptions, AAK engineers confidently informed that the sample could be successful at one time.

George may think that only AAK can help him solve the problem.

He directly paid a proofing fee of $1, 200.00 and asked us to send the hydraulic pressure control valve samples within 3 weeks.

We appreciated George's frankness and asked the workshop to cooperate fully.

After 15 days, we successfully sent the samples of hydraulic pressure control valves.

On the third day after George received the samples, he told us that the machining accuracy of AAK hydraulic pressure control valve not only met the requirement of machining allowance of 0.3mm, but also increased by 5%, which made him admire very much.

In order to ensure the accuracy of finish machining size allowance, the heat treatment process is the most critical step.

At present, most hydraulic pressure control valve manufacturers adopt local quenching, the workpiece heat treatment process is not easy to control, and most of them are easy to deform.

As early as 6 years ago, AAK adjusted local quenching to overall quenching.

At the same time, vertical flow treatment must be required for the hoisting mode in the process of quenching and tempering, so as to minimize the influence of the tissue stress and thermal stress of the workpiece heat treatment on the deformation, so as to meet the dimensional allowance requirements of finish machining.

The next day, George decided to cancel the order of the hydraulic pressure control valves with the old manufacturer and told me that AAK hydraulic valve is his old supplier now.

Maybe he meant to tell me that his hydraulic pressure control valves will be purchased from AAK in the future.

AAK hydraulic pressure control valves, the finish machining accuracy is 5% higher than the requirements of German customer.

You can also have a small try! AAK HYDRAULIC VALVE (178) 2022-03-27

Company Contact:

• Posted By: AAK Industry CO., LTD

• Phone: +8657483008115

• Address: Bona Business Building, No. 456 Taikang Middle Road,, Yinzhou, Ningbo, China, Ningbo , Zhejiang , China

• Email:

• Website: https://www.aakindustry.com/

• Business Description: Focused on the Development and Manufacturing of Hydraulic Valves since 2006, in Ningbo China
  
  Since its establishment 12 years ago, 6 first-line international brand importers have placed orders with AAK for 5 consecutive years, with a re-peat order rate of 62%.
  
  Exported to more than 20 countries, AAK Hydraulic Valves used on "AIRCRAFT" have been supplied to Russian customers.
  
  68%+ of the high precision hydraulic valves exported from Ningbo Port come from AAK hydraulic valves.