Solutions For Laser Cut Machine - China

Laser cut machine is a material-cutting method that uses an intensely focused, coherent stream of light to cut through metals, paper, wood, and acrylics.

It is a subtractive process that removes material during the cutting process using vaporization, melting, chemical ablation, or controlled crack propagation.

Laser optics controlled by Computer Numerical Control (CNC) can drill holes as small as 5 microns (µ).

The process does not produce residual stresses on materials, making it possible to cut fragile and brittle materials.

The following will list 63 common failures and solutions for laser cutting machines:

1 - Turn on The Alarm?Whether the water pipe is turned onCheck whether the water tank is waterCheck whether the water tank water pipe is skimmed or there are objects pressing the water pipe, so that the water pipe does not flow.

Check whether the water tank signal line is connected to the machine is loose or the signal line itself is faulty.

If the water tank gives a warning, check the water tankIf it is the motherboard alarm, first confirm whether the motherboard water protection terminal jumped, if it jumped, replace the motherboard.

2 - Power on Does not Return to the Origin?The main board X.

Y pulse indicator is on Replace the motherboard.

3 - laser cutting machine Cutting Round Irregularities?Check whether the screws on the X, Y screw seat are tightenedCheck whether the board is clampedCheck whether there are errors in the graphics laser cutting machine common troubleshooting methods

4 - Cutting Effect is not Good or Cut Through?Power setting is small, potentiometer screw small, light bias, dirty lens, focus lens installed backward, focal length, laser power supply, laser tube power attenuation, water temperature is too high, voltage instability, etc.

according to the actual situation, determined by simple as deep

5 - Back to the Origin of The Boot to the Opposite Direction of Movement?Home switch damage

6 - Equipment Can not Start And StartThe Indoor Vacancy on The Trip?Whether the emergency stop pop-up, whether the external circuit is connected, whether the equipment is closed inside the cavity, whether the machine is turned on to hear the sound of a snap if you have to check the main contactor and control transformer, etc.

; water protection leakage leads to laser power into the water short circuit (such as JGHY12570 water protection position installed on the side, it is just below the laser power), 107 pump short circuit, indoor Vacant open use too small, etc.

7 - High-voltage Line Fire?This problem is really a headache, I suggest that the outside of the high-voltage wire is set on the high-voltage insulation sleeve8 - Graphic Size is Too Large or Too Small?Output graphics size is the same, Z-axis height position changes, correction files, etc.

Company Contact:

• Posted By: igoldencnc2020

• Phone: +86-15688871861

• Address: Private Industrial Park, Yu Huang Miao Town, Shanghe, Ji’nan, Shandong, shandong , China

• Email:

• Website: https://www.igolden-cnc.com/

• Business Description: We are a company integrating manufacturing and sales of CNC routers, laser engraving machines, laser cutting machines, plasma cutting machines, cutting plotters, etc.
  
  The main configuration all adopt top parts imported from Italy, Japan, Germany, etc.
  
  We adopt international advanced producing technologies to improve our products.
  
  Our products are widely used in advertising, woodworking, artworks, model, electric, CAD/CAM industry models, clothing, package printing, marking, laser sealing and so on.