Embossed Stainless Steel Welding - China

Small Panes Embossed Stainless Steel Sheet Different patterns are produced by pressing the surface of stainless steel sheet through a certain pattern mold.

The embossing process can be performed on the basis of 2B or Mirror surface.

The difference between them is that former is matte and the latter is bright.

Generally, the basic material are 201, 304, 316Land 430 - Our thickness range is 0.3mm to 2.5mm, and the standard size is 1219x2438mm and 1219x3048mm, what's more, we could do as coil if customer request.

APPLICATION

This surface is often used in public facilities, kiosks, indoor and outdoor decoration and elevator decoration.

We could do many treatment on the embossed surface such as PVD and part PVD.

Raw material: We generally choose TISCO, BAOSTEEL, POSCO material because they are with high density and low hardness.

The material surface will be nice, smooth, bright after polishing and they are more suitable to welding, cutting and bending.

Process Quality control: Firstly, the sheet is embossed by the embossing machine.

After washing and drying, our inspector would check the surface quality under the light and coating the PVC film if quality is confirmed.

PVC: The standard PVC for Emboss surface is NOVACEL brand PVC imported from Germany with thickness of 0.07mm.

(Other kinds of PVC could be supplied if customer asked.

)

Package: Our package is fumigation wooden case which is table and suitable for sea transportation.

(The Package could be specially produced per customers' request.

)

Pre-delivery Inspection: We have standardized production process and pre-delivery inspection.

Company Contact:

• Posted By: Shenghe Zhongtai Stainless Steel Co., Ltd.

• Phone: +86-010-87603028

• Address: Room A309 Unit A, Dream Valley, 6th Road, Jinghai, Economic & Technological Development Zone, Yi, Beijing , Beijing , China

• Email:

• Website: https://www.sunsongss.com

• Business Description: Beijing Shenghe Zhongtai Stainless Steel Co., Ltd was established in 2009 and located in Beijing, China.
  
  In the past 9 years, we have focused the Stainless steel material and surface finish.
  
  We have passed the ISO9001 test in 2011, and applied the brand of “SUNSONG”in same year.
  
  Following the company developed by 2016, we have built our manufacturing base of Hebei Shengnuo Metal Products Co., Ltd In Hebei province which is the biggest manufacturing base for Stainless steel surface treatment in North of China.
  
  We have imported the advanced cutting equipment to do the coil cutting and flatting.
  
  And we have all process machines such as Hairline finish, 8K finish, Bead blasted, Vibration, Anti-finger print, PVD machine and Bending machine, Laser cutting machine.
  
  etc.
  
  Especially only we could do the surface treatment for the with more than 1500mm.
  
  And our factory covers an area of more than 16000 square meters, introduces advanced equipments such as CNC shearing machine, keyway planer, Bending and laser machine, provides full-service of stainless steel processing.
  
  Our annual outputs has exceeded 3000 mts.
  
  We are capable to provide one stop services for architecture stainless steel decoration from stainless steel surface treatment, processing, fabrication, assembly and installation.