Touch Screen Control Auto Interior Horizontal Combustion Tester - China

Touch screen control auto interior horizontal combustion tester Touch screen control auto interior horizontal combustion tester main parameters

1 - Seven-inch full-color touch/display:

a.

Size: 7 inch effective display size 15.5cm long and 8.6cmb wide.

resolution: 800*480

c.

Communication interface RS232, 3.3V CMOS or TTL, serial mode d.

Storage capacity: 1G

e.

Using pure hardware FPGA drive display, "zero" start-up time, power on can run

f.

M3 + FPGA architecture, M3 is responsible for instruction resolution, FPGA focus on TFT display, speed and reliability are ahead of similar programs g.

The main controller are low-energy processor, automatically enter the energy-saving mode

2 - Experimental data can be stored in the touch screen, you can access to query the historical data.

3 - After recording the burning time equipment automatically calculates the test results burning speed (also known as the burning rate).

4 - large fume cupboard, really meet the requirements of GB8410-2006; direct contact with the test flame combustion chamber as a whole using stainless steel, high durability.

5 - timing accuracy 0.1s.

6 - Bunsen burner (i.e. burner) to the specimen applied flame 15s.

7 - Bunsen burner tube inner diameter 9.5mm + 0.1mmm, about 100mm long.

8 - test inclination: Bunsen burner 90 ° vertical to the horizontally placed sample burning.

9 - flame height: 20mm Shi2mm to 100mm Shi2mm adjustable (generally adjusted to 38mm).

10 - application of flame time: 0-999.9s soil 0.1s adjustable (generally selected as 15s).

11 - Continuity of combustion time: 0-999.9s ± 0.1s, observe the flame to reach the first mark after the manual start, manual pause.

12 - combustion gas: liquefied petroleum gas or gas.

13 - Wind speed control/testing device (optional).

14 - Dimensions: L * W * H 1310 * 650 * 1560mm (including feet) internal combustion box length 383mm width 205mm height 355mm.

15 Ventilation area: >0.75 cubic meters, length * section * height about 1050mm × 640mm × 1300mm, background black, background illumination ≤20Lux.

ps: (WLJCDM809)

Company Contact:

• Posted By: Qinsun Instruments (Shanghai) Co., Ltd.

• Phone: +862164200566

• Address: No. 2578 Minhang District Gu Dai Road, Shanghai, Shanghai , shanghai , China

• Email:

• Website: https://www.qinsun-lab.com

• Business Description: Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry.
  
  Qinsun specialize in the research and development of high quality lab instrument for textile testing industry.
  
  Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
  
  We have our own textile testing lab.
  
  Our textile testing methods and testing equipment are in the leading position in the industry and have passed the textile testing certification and iso textile testing standards issued by a number of testing.
  
  We always develop the highly sophisticated test instrument which can meet the various demands of the textile industry.
  
  We provide the upfront Micro weathering test equipments with our own brand name QINSUN, such as thermal resistance wet resistance meter, MMT(moisture management tester) etc, and the new functional test instrument include air permeability tester, hydrostatic head tester, thermal protection performance tester, as well as the widely used lab testing equipment such as textile washing color fastness tester, abrasion tester, pilling tester, rubbing color fastness tester, ironing tester and perspiration tester.
  
  For the laboratory requirements, we also bring forth the new practical test instruments.
  
  Qinsun products include: fabric test equipment, Textile Fabric Tester, fiber tester, yarn tester, carpet tester, non-woven fabric tester, toy tester, leather tester, automotive material test equipment and others.