155 visiting now: 151 USA USA flag 5 UK UK flag 1 Singapore Singapore flag 1 Belgium Belgium flag 1 Russia Russia flag

Highlighted Companies

Only Aak Was Able To Produce The Hydraulic Manifold Blocks - China

price: 100.00 Dollar US$

Scott comes from an equipment company in the United States.

In the second half of last year, they developed a hydraulic equipment to be introduced at the exhibition.

The chief engineer of the company requires the purchasing department to get all hydraulic manifold blocks arrive at the factory within 3 months.

There is a hydraulic manifold block.

Due to the slow production, the production time of 45 days is not enough.

Scott disassembled the hydraulic manifold blocks, purchased the hydraulic valve blocks from one factory and the hydraulic cartridge valves from another factory.

All hydraulic manifold blocks and those parts produced separately arrived at the factory in the United States in 3 months.

The technicians in the workshop installed them.

After a few days of commissioning, they found that there were oil leakage on one hydraulic manifold block, that is the one disassembled and produced in two different factories.

The chief engineer requires getting a new hydraulic manifold block within 1 month, otherwise it will be too late to catch the exhibition.

Scott contacted the original manufacturer.

As a result, the two hydraulic valve manufacturers prevaricated each other.

Their engineers also tested the hydraulic cartridge valves and hydraulic valve blocks separately, and there was no abnormality.

Scott tried to contact new manufacturers of hydraulic manifold blocks, but they all said that they couldn't get samples ready within 30 days.

Scott was worried.

Scott saw on AAK website that a hydraulic manifold block was very close to the size he wanted to purchase, so he sent an inquiry.

After two rounds of communication, we learned about the problems he encountered in purchasing hydraulic manifold blocks.

I told him that if the hydraulic cartridge valves and the hydraulic valve blocks were approved to be no problem, the workshop technician might break the seal ring or shift the seal ring during the installation of the hydraulic manifold blocks.

This kind of hydraulic manifold blocks purchased from different manufacturers and then assembled is easy to have problem.

A customer of AAK encountered similar problems before.

After Scott asked their mechanic to replace the sealing ring, there was no abnormality in the test run, and they could catch up with the exhibition.

Scott is glad that the problem of hydraulic manifold block has been solved, and said that for all hydraulic equipment orders after the exhibition, the hydraulic manifold blocks will be purchased from AAK, and also asked us to send hydraulic manifold blocks with similar dimensions to the United States to test stability and service life.

Scott sent an inquiry for hydraulic manifold blocks last week and said that the exhibition effect was good.

After two rounds, we finalized the price of hydraulic manifold blocks and confirmed the production time of 100 hydraulic manifold blocks.

I asked in private why he chose to purchase hydraulic manifold blocks from AAK.

Scott told me 3 points, which encouraged me a lot: 1 - I contacted more than 10 new hydraulic manifold manufacturers, but all of them answered "No", while AAK gave us the direction to solve our problems.

I felt that AAK is not short-sighted and thinking about doing business rightly with heart.

2 - Although the hydraulic manifold block of AAK is 12% more expensive than its peers, the tested service life is 60% higher than that of the original manufacturer.

3 - The quality parameters of AAK hydraulic manifold blocks have been on par with those of local manufacturers in the United States.

There are 2 data that surpass local manufacturers.

The prices are more than 30% cheaper and the delivery time is also fast.

AAK can well complete our overseas procurement strategy.

AAK, dedicate to hydraulic valves and hydraulic manifold blocks a lifetime.

You can also have a small try! AAK HYDRAULIC VALVES (218) 2022-05-06


Company Contact:


  • Phone: +8657483008115

  • Address: Bona Business Building, No. 456 Taikang Middle Road,, Yinzhou, Ningbo, China, Ningbo , Zhejiang , China

  • Email: Email


Published date: June 5, 2022

  • Business Description: Focused on the Development and Manufacturing of Hydraulic Valves since 2006, in Ningbo China

    Since its establishment 12 years ago, 6 first-line international brand importers have placed orders with AAK for 5 consecutive years, with a re-peat order rate of 62%.

    Exported to more than 20 countries, AAK Hydraulic Valves used on "AIRCRAFT" have been supplied to Russian customers.

    68%+ of the high precision hydraulic valves exported from Ningbo Port come from AAK hydraulic valves.

Related listings



  • Truss Corridor
    Truss Corridor
    Prefabricated buildings and structures - Fast Steel Factories Co., Ltd. - China - May 30, 2022 - 735.00 Dollar US$

    Truss corridor Delivery time: 15-30days Price term:EXW, FOB, CIF, CFR, CNF, etc. Payment:L/C, T/T, Western Union, etc. Port Delivery:Qingdao, Shanghai, Tianjin, Shenzhen, etc. Package: Standard export package or as required. We can provide customized...

  • Large Span Structure System
    Large Span Structure System
    Prefabricated buildings and structures - Fast Steel Factories Co., Ltd. - China - May 29, 2022 - 735.00 Dollar US$

    Large span structure system Delivery time: 15-30days Price term:EXW, FOB, CIF, CFR, CNF, etc. Payment:L/C, T/T, Western Union, etc. Package: Standard export package or as required. Port Delivery:Qingdao, Shanghai, Tianjin, Shenzhen, etc. We can provi...

  • I Regard Quality As The Highest Principle Of Hydraulic Valve Manufacturing Why
    I Regard Quality As The Highest Principle Of Hydraulic Valve Manufacturing Why
    Prefabricated buildings and structures - AAK Industry CO., LTD - China - May 29, 2022 - 100.00 Dollar US$

    For a hydraulic valve manufacturer, if you produce hydraulic valve standard parts like your peers, without your differentiation or difference, you can only rely on a set of hard technical indicators of quality to make the market. I think this is the ...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"