Perlove Medical With Product Manufacturer Pld8000c - China

① kV and mA values The combination of these two parameters constitutes the ability of the tube to release electrons and X-rays to effectively penetrate the photographed object, and determines the amount of heat released inside the tube.

The greater the mA and kV, the more heat is released.

Predicting the amount of heat generated helps to determine whether the dome tube is overheating during operation, and thus maintains and extends the life of the dome tube.

② Tube Power The rate of heat generation within the tube is equal to the electrical power given by the tube and is usually related to the formula (Power (W) = w x kVp x mA).

The higher the power, the shorter the life of the tube.

However, if there is not enough power, there may not be enough X-ray intensity to do the job, so operating the tube at the lowest available power extends its life.

Influence of tube voltage and tube current on X-ray intensity ③Anode target The anode target links the focal width, the projected spot size and the focal heat capacity.

In the case of a certain effective focal point, the smaller the target angle, the larger the actual focal point, the more unfavorable to the target surface heat dissipation, so the target angle is generally 6-17.5 °, and the anode target requires a large heat capacity, good resistance to thermal expansion.

④Anode heat capacity Focus (0.6~1.2) heat capacity, 200kHU, 300kHU, 400kHU and so on are more reasonable; Focus (0.3~0.8) heat capacity is 600kHU, 700kHU and above are more reasonable.

Among them, the heat capacity of the bulb represents the bearing capacity of the whole tube sleeve, which is related to the heat dissipation curve; the larger the diameter size of the target surface, the more obvious the heat dissipation effect.

⑤ Focus size Focus size is used to measure the spatial resolution presented by the tube, in order to obtain high quality image resolution, it is usually necessary to use a smaller focus size (micro-focus: less than 0.4mm; smaller focus: less than 1mm, micro-focus is usually used as a cardiovascular fluoroscopy tube more).

When shooting images, the smaller the focal point, the higher the resolution, but the power will also be reduced, the balloon can be a good solution to improve the power and reduce the contradiction between the focal point is extremely important.

Company Contact:

• Posted By: Nanjing Perlove Medical Equipment Co.,ltd

• Phone: 18846759047

• Address: No.97,Wangxi Road, Jiangning District,Nanjing, Nanjing, Jiangsu Province, China, China

• Email:

• Website: https://www.perlove.com.cn/

• Business Description: Founded in 2003, Perlove Medical is a high-tech enterprise integrating research and development, production, sales and after-sales service of medical X-ray imaging equipment and orthopedic surgical robots.
  
  Sales network covers the whole country, products are exported to more than 100 countries and regions.
  
  The company always adhere to independent research and development, scientific and technological innovation, customer demand-oriented, close to the clinical, to provide high-quality products and services for global medical institutions, promote the development of medical technology, so that more people enjoy high-quality medical services