Compound Salt Spray Cct Corrosion Test Chamber - China

Compound Salt Spray (CCT) Corrosion Test Chamber Composite salt spray (CCT) corrosion test chamber is also called cyclic corrosion test chamber or CCT salt spray test chamber.

Some industrial products require exposure to repeated cycles of salt spray, high humidity, and low humidity drying and standing.

These tests were initially manually switched between several test boxes.

The multifunctional compound salt spray box solves this problem well, and realizes these cycle tests automatically in one box.

Standards compliant: GB/T 1771-2007 "Paints and varnishes - Determination of resistance to neutral salt spray"

GB/T 31588.1-2015/ISO11997-1: 2 005 "Paints and varnishes - Determination of cyclic corrosion resistance - Part 1: Wet (salt spray)/dry/moisture"

GB/T 2423.17-2008 "Environmental test of electrical and electronic products - Part 2: Test method Test Ka: Salt spray"

GB/T 2423.18-2000 "Environmental test of electrical and electronic products - Part 2: Test Test Kb: Salt spray, alternating (sodium chloride solution)"

GB/T 2423.3-2006/IEC6008-2-78- 2001 "Environmental test of electrical and electronic products - Part 2: Test method Test Cab: Constant damp heat test"

GB/T 5170.8-2008 "Test methods for environmental test equipment for electrical and electronic products--Salt spray test equipment"

GB/T 10125-1997 "Artificial Atmosphere Corrosion Test Salt Spray Test"

GB/T 10586-2006 "Technical Conditions for Damp Heat Test Chamber"

GB/T 10587-2006 "Technical Conditions for Salt Spray Test Chamber"

GB/T 10593.2-2012 "Measurement methods for environmental parameters of electrical and electronic products - Part 2: Salt spray"

GB/T 12000-2003 "Determination of the influence of plastic exposure to damp heat, water spray and salt spray"

GB/T 20854-2007/ISO14993: 2001 "Corrosion of Metals and Alloys - Accelerated Testing of Cyclic Exposure to Salt Spray, Dry and Wet Conditions"

GB/T 24195-2009/ISO16151: 2005 "Corrosion of metals and alloys - Cyclic accelerated corrosion test under acidic salt spray, "dry" and "wet" conditions Features:

◆ The test chamber is welded with imported CPVC board, the board thickness is 8mm, and the durable temperature is 100℃;

◆ The test box is welded with imported PVC board (Nanya, Taiwan), with a thickness of 6mm and a durable temperature of 85°C;

◆ The inner box of the drying and damp heat control box is made of SUS304# stainless steel, the outer box is made of PVC polyethylene board, and the thermal insulation material is made of polyurethane rigid foam;

◆ The sealing cover of the laboratory is made of imported CPVC board, with internal strengthening treatment, thickness 8mm, and the top is a 100-degree angle sealing cover.

The internal strengthening treatment can effectively prevent condensation water from dripping on the surface of the sample during the test to affect the test results.

At the same time, the box cover is provided with 1 A transparent tempered glass observation window (size is 400mm*400mm)

◆Pressurized air barrel: Made of SUS304# stainless steel, high pressure resistance and best heat preservation effect

◆ Salt water replenishment tank: made of CPVC board, total capacity: 25L PS: (WLJCDM809-W)

Qinsun Instruments Co., Ltd

Company Contact:

• Posted By: Qinsun Instruments (Shanghai) Co., Ltd.

• Phone: +862164200566

• Address: No. 2578 Minhang District Gu Dai Road, Shanghai, Shanghai , shanghai , China

• Email:

• Website: https://www.qinsun-lab.com

• Business Description: Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry.
  
  Qinsun specialize in the research and development of high quality lab instrument for textile testing industry.
  
  Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
  
  We have our own textile testing lab.
  
  Our textile testing methods and testing equipment are in the leading position in the industry and have passed the textile testing certification and iso textile testing standards issued by a number of testing.
  
  We always develop the highly sophisticated test instrument which can meet the various demands of the textile industry.
  
  We provide the upfront Micro weathering test equipments with our own brand name QINSUN, such as thermal resistance wet resistance meter, MMT(moisture management tester) etc, and the new functional test instrument include air permeability tester, hydrostatic head tester, thermal protection performance tester, as well as the widely used lab testing equipment such as textile washing color fastness tester, abrasion tester, pilling tester, rubbing color fastness tester, ironing tester and perspiration tester.
  
  For the laboratory requirements, we also bring forth the new practical test instruments.
  
  Qinsun products include: fabric test equipment, Textile Fabric Tester, fiber tester, yarn tester, carpet tester, non-woven fabric tester, toy tester, leather tester, automotive material test equipment and others.