Food Grade Silicone For Cake Mold Making - China

Description: The food grade silicone for fondant mould is a kind of liquid RTV addition cure mold making silicone rubber with two parts, part A is the silicone rubber base, part B is the platinum curing agent.

Also, since it is platinum cure silicone rubber, and in food grade with FDA certificate.

It is very suitable to make food related products mould, such as chocolate, candy, cake, butter, fondant, butter, ice statues, cookies, etc.

The platinum cure silicone rubber's mixing ratio is 1: 1 and its curing would be heavily impacted by the temperature.

Characteristics： * low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1: 1)

*good fluidity easy for pouring operation *platinum cure, food grade Applications: Food Grade Related Applications

Cake mold

Chocolate moldmaking

Candy moldmaking

Baking moldmaking

Ice trays molding

Casting butters Casting for Kitchen products Datesheet: Model NO· SE-620# SE-625#

Mixing Ratio (by weight) 1: 1 1: 1

Appearance/Color Translucent Translucent

Hardness (Shore A) 20±2 25±2

Mixed viscosity (mPa·s) 2000±500 2800±500

Working Time(at23℃/75℉, MINS) 30~40 30~40

Curing Time (at 23℃/75℉, HRS) 4~5 4~5

Tensile strength, Mpa ≥5.1 ≥5.5

Tear strength, KN/m ≥24.8 ≥26.5

Shrinkage, % <0.1 <0.1

Elongation at break, % ≥640 ≥510 Using instructions: 1 - Pls clear the model and tool totally before operation to prevent cure inhibition.

2 - Weigh the two part correctly by electronic weight in two separate container .

3 - Mixing the two part in 1: 1 and stir part A and part B evenly in 2-3 minutes .

4 - And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes .

(If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5 - Enclose the product (the original model) with four plastic plates or wooden plates.

6 - Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7 - Pour the vacuumed mixture into the model frame from the side of the mold frame .

Notice: As our it is platinum cure silicone, which is very easy to cause

cure inhibition, so pls do remember thoroughly clean the model and tool before

operation .

Besides, pls avoid the liquid silicone contact or mix with the

following material, otherwise the silicone won’t be cured :

1 - Liquid condensation silicone ( condensation silicone not completely cured or organic

tin compounds )

2 .

Sulphur, sulfide and sulfur rubber materials.

3 - Amine compounds as well as contains the amine materials.

4 .

Pewter solder flux.

Company Contact:

• Posted By: GUANGDONG SEMOST BIOTECHNOLOGY CO.,LTD

• Phone: 13527947568

• Address: songke count, Dongguan , Guangdong , China

• Email:

• Website: https://www.semost.cn

• Business Description: SEMOST has manufactured condensation cure (tin-catalyzed) and addition cure (platinum- catalyzed) RTV-2 (Room Temperature Vulcanized - 2 components) silicones & Fabric printing silicone since 2003 - We have the formulating and manufacturing expertise to produce custom RTV-2 silicones for a variety of applications.