Pure Clear Customized Dimethyl Silicone Oil For Anti Foaming Agent - China

Pure clear Customized Dimethyl Silicone Oil For Anti - foaming Product Description Molecular formula(CH3)3Sio[(CH3)2Si O]n*Si(CH3)3 This product is colorless transparent new type synthetic high polymer material with variety of viscosities(20-1000 000cps), it is from easily flowing liquid to thick semi-solid, Pure silicone fluids are characterized by their, excellent lubrication, high dielectric stability and wide service temperature range(-50 to 170 open system)(-50to 250 closed system).

Characteristic 1 - Colorless, transparent, deodorant, no-toxic, no-erosion liquid 2 - Good chemical stability, excellent insulation performance and moisture resistant 3 - Viscosity ranging from 5cs-5 million cs.

4 - Heat and cold resistant, can work between -50C~+200C in the long run.

5 - Low surface tension, high flash point, low freezing point.

Application: Surfactants and antifoaming agents PDMS are common components of defoamers, which are used to suppress the formation of foams.

PDMS in a modified form is used as an herbicidal penetrant.

and is a critical ingredient in water-repelling coatings, such as Rain-X.

Hydraulic fluids and related applications Dimethicone is also the active silicone fluid in automotive viscous limited slip differentials and couplings.

This is usually a non-serviceable OEM component but can be replaced with mixed performance results due to variances in effectiveness caused by refill weights or non-standard pressurisations.

Cosmetics PDMS is used variously in the cosmetic and consumer product industry as well.

For example, PDMS can be used in the treatment ofhead lice.

and dimethicone is used widely in skin-moisturizing lotions where it is listed as an active ingredient whose purpose is "skin protection.

" Some cosmetic formulations use dimethicone and related siloxane polymers in concentrations of use up to 15%.

The Cosmetic Ingredient Review's (CIR) Expert Panel, has concluded that dimethicone and related polymers are "safe as used in cosmetic formulations.

" Domestic and niche uses Many people are indirectly familiar with PDMS because it is an important component in Silly Putty, to which PDMS imparts its characteristic viscoelastic properties.

The rubbery, vinegary-smelling silicone caulks, adhesives, and aquarium sealants are also well-known.

PDMS is also used as a component in silicone grease and other silicone based lubricants, as well as indefoaming agents, mold release agents, damping fluids, heat transfer fluids, polishes, cosmetics, hair conditioners and other applications.

PDMS has also been used as a filler fluid in breast implants, although this practice has decreased somewhat, due to safety concerns.

Application 1 - It is used for rigid polyurethane foam additives.

2 - It is used for metal surface moisture, rust coatings.

3 - It is used as waterproof coating for building surface.

4 - It is used as lubricating oil, vibration insulation oil, oil, defoamer, remover, polish and vacuum oil diffusion pump, etc.

5 - It is used as emulsifier.

3 - Poly(dimethylsiloxane) Specification : - - - - VISCOSITY | SPECIFIC GRAVITY | POUR POINT | FLASH POINT | VISCOSITY/TEMP COEFFICIENT | THERMAL EXPANSION CC/CC C | THERMAL CONDUCTIVITY G/CAL/CM/SEC C | 50 cst | 0.960 | -55C | 285C | 0.59 | 0.001060 | 0.00036 | 100 cst | 0.966 | -55C | 315C | 0.60 | 0.000960 | 0.00037 | 200 cst | 0.968 | -50C | 315C | 0.60 | 0.000960 | 0.00037 | 350 cst | 0.970 | -50C | 315C | 0.60 | 0.000960 | 0.00037 | 500 cst | 0.971 | -50C | 315C | 0.60 | 0.000960 | 0.00038 | 1, 000 cst | 0.971 | -50C | 315C | 0.61 | 0.000960 | 0.00038 | - - - - Package, store and delivery: 1 It should be stored in clean, sealed container without lead and tin alloy, avoid from acid, alkali and other impurity, avoid from fire.

2 Stored and conveyed as dangerous good.

3 Shelf life can be 3 years when it is coming off from the line if maker do as what item 1 mentioned.

Simethicone which beyong the shelf life can be reused if it is still good after test.

Package can be 50kg plastic cask and 200kg iron cask with plastic interior.

Company Contact:

• Posted By: Lyrin Industrial Corporation Limited

• Phone: 86-731-82571800

• Address: Rm 2408,Asia Economy International Building,Shaoshan Road South,Yuhua District,Changsha,Hunan,C hina, Changsha , Hunan , China

• Email:

• Website: https://www.dimethylsiliconeoil.com

• Business Description: LYRIN are founded in 2008, with several years experience in silicone products exporting and importing issue.
  
  for expanding business and market, we registered and found a new company, Hunan Tengcan Lyrin Technology Co., LTD.LYRIN are continously refining on good quality and service for each of our customers.