High Precision Directional Sensor - China

Introduction

The ER-OS-07 High Precision Directional Sensor is designed to enable high accuracy measurement of the tool face (roll), inclination and azimuth orientation angles in borehole logging and drilling applications.

The product consists of a 3-axis flux-gate magnetometer and a 3-axis accelerometer.

It is powered by a wide DC voltage of 10V~36V and is digitally transmitted through a UART asynchronous transmitter.

ER-OS-07 has a temperature compensation function, which can make the system reach the accuracy of ±0.1°, tool face ±0.1° and azimuth angle ±0.3°.

The maximum transmission rate of the magnetometer and accelerometer output is 6 times per second, and the direction angle is 4 times per second.

ER-OS-07 communicates with the outside world through the UART interface.

The operator can change the baud rate by setting the data bit in E2 PROM.

You can choose between two communication protocols according to specific requirements:

(1) Binary system: In this system, the user needs to send a data request and ER-OS-07 responds with multiple data packets.

(2) ASCII: The ASCII protocol obtains data by sending ASCII characters to ER-OS-07 - The data returned by ER-OS-07 is transmitted in ASCII data stream, so it can be easily displayed on the video terminal.

Company Contact:

• Posted By: ericcoinertialsystem

• Phone: 17391988506

• Address: 高新, 瑞鑫大厦, xi'an , Shaanxi , China

• Email:

• Website: https://www.ericcointernational.com/north-finders/

• Business Description: Ericco, established in 2006, is a group corporation in China and specializes in R & D and manufacture of all kinds of inertial sensors and inertial positioning / orientating / navigation / attitude measuring systems, such as MEMS gyroscope, FOG gyroscope, Liquid Floating Gyroscope, Quartz Accelerometer, MEMS Accelerometer, North Finder, IMU, INS, AHRS, etc., which are widely applied in many different industries including Aviation / Aerospace / Weapon / Ship / Electronics / Petroleum / Gas / Mining and so on.
  
  After fifteen years of development, Ericco has successfully served clients from more than 50 countries, and provided clients with excellent standard products and customized solutions for the applications of North seeking, Positioning and Orientating, Navigation, Attitude Measuring & Control, Oil & Gas downhole exploitation.