Pencil Injector 28412 Toyota Fuel Injectors For Common Rail Spare Parts - China

Pencil Injector 28412 Toyota Fuel Injectors for Common Rail Spare Parts #Pencil Injector #

#Toyota Fuel Injectors#

#Pencil Injector & Toyota Fuel Injectors# CHINA-LUTONG is specialize in providing high quality common rail injectors.

The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.

Lower fuel pump peak torque requirements.

As high speed direct injection (HSDI) engines developed, more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older, IDI combustion systems.

Only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions.

To generate the energy required to inject the fuel in approximately 1 millisecond, the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution, thus placing considerable strain on the drive shaft.

One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement.

While the power and average torque requirements of the common rail pump were similar, high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump.

Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.

Improved noise quality.

DI engines are characterized by higher peak combustion pressures and, thus, by higher noise than IDI engines.

It was found that improved noise and low emissions were best achieved by introducing pilot injection(s).

This was most easily realized in the common rail system, which was capable of stable deliveries of small pilot fuel quantities over the entire load/speed range of the engine.

nozzle and holder assy

nozzle fuel injector

nozzle injector

nozzle injector delphi

nozzle injector denso

nozzle injector parts

nozzles or injectors

nozzles or injectors cummins

OE Diesel Injectors

OEM Diesel Fuel Injectors

oem fuel injectors

parts of fuel injector

Pencil Fuel Injector

Pencil Injector

Pencil Injector for John Deere

solenoid valve injector

Stanadyne Diesel Injector

Stanadyne Fuel Injector

Stanadyne Fuel Injectors

Stanadyne Injector

stanadyne injectors

Stanadyne Pencil Fuel Injector

Stanadyne Pencil Injector Assembly

toyota diesel fuel injectors

Toyota diesel injector

toyota diesel injectors

toyota fuel injector

toyota fuel injector replacement

Toyota Fuel Injectors

toyota injector E-mail: fuelinjectionparts @ hotmail.

com

WhatsApp: +861366693197 0

QQ : 2850613608 DEC GAO

Company Contact:

• Posted By: China-Lutong Parts Plant

• Phone: 13666935270

• Address: Xinhan Industrial Zone, Hanjiang District, Putian, Fujian, 351111 Chin, Putian , fujian , China

• Email:

• Website: http://www.china-lutong.com

• Business Description: China Lutong Parts Plant is a manufacturer specialist in diesel engine parts.
  
  The majored products is Head Rotor(VE Pump Parts) Nozzle, Plunger, Delivery Valve and so on .
  
  As a elder manufacturer for diesel engine parts, we keep step with the international standard and technics.
  
  And we absorb the advanced producing and testing technic .
  
  The quality of our products are in the same class with other overseas famous manufacturers.