How To Operate A Semi Tipper Trailers Avoid Serious Accidents - China

When the semi tipper trailers unloads the cargo, taking shortcuts without following established safety procedures may have serious consequences.

Each operator of such equipment should keep the following recommendations in mind to minimize risks and ensure the safety of operators and other personnel, as well as prevent serious damage and injury.

Common problems and solutions

Semi tipper trailers are suitable for the transportation of bulk and bulk goods such as coal, ore and building materials.

Semi tipper trailers can be divided into two categories according to their uses: One category is heavy-duty and super-heavy dump trucks used for off-road transportation.

They are mainly responsible for large-scale mining and engineering transportation tasks, and are usually used in conjunction with excavators.

Another type of dump trailer, medium, and ordinary dump trucks for road transportation is mainly responsible for the transportation of loose goods such as sand, gravel, coal, etc.

It is usually used with a loader.

Q1 - Why does the semi tipper trailer go down when the instrument panel's lift switch is pressed; and when the instrument panel's down switch is pressed, the semi tipper trailers lifts?

A: This is caused by the reverse connection of the solenoid valve that controls the lifting and lowering.

There are three ways to eliminate: ① swap the wires of the lifting and lowering switches on the instrument panel; ② swap the wires of the solenoid valve that controls the lifting and lowering; ③ swap the two air pipes of the distribution valve.

Q2 - The dump truck can't lift?

A: The following parts should be investigated for the dump truck without lifting.

Check the power take-off: first see if the drive shaft connected to the oil pump rotates, if it does not turn, it means that there is a problem with this part of the power take-off (the solenoid valve of the power take-off or the power take-off itself has a problem);

Check the oil pump: ① Whether the rotation direction of the oil pump is correct.

Extend the left hand, the thumb is facing the spline of the oil pump, and the rotation direction of the remaining fingers is the same, it is the left-handed pump, otherwise it is the right-handed pump.

②Whether the oil pump is damaged.

Wear of the oil pump will cause the high and low pressure chambers of the oil pump to communicate and fail to pump oil.

Check the distribution valve: ① Check whether there is gas in the air pipe on the distribution valve.

Press the lifting and lowering switches to check whether there is air in the two trachea on the distribution valve.

If there is no gas, it means that the solenoid valve that controls the lifting and lowering has failed, and the solenoid valve should be replaced.

② Is the distribution valve damaged?

Q3 - Is the lifting speed of the side tipper box adjustable, and is it a malfunction that the speed of automatic descent is faster?

A: The lifting speed is not adjustable.

Falling too fast is a malfunction.

Q4 - What are the important hydraulic components of the hydraulic lifting system and what role do they play?

Answer: Oil pump-oil supply; one-way valve-controls the flow of oil; distribution valve (rotary valve)-controls the lifting and lowering of the rear tipping trailer; oil cylinder-generates thrust.

Q5 - How to solve the climbing problem in the lifting process?

Answer: Sometimes during the lift of the car, the phenomenon of climbing will occur.

This phenomenon is mostly caused by the intake air in the hydraulic system and the oil cylinder filled with the mixture of oil and gas.

Q6: What is the reason for insufficient braking force and reduced braking efficiency?

A: Insufficient air pressure (air pressure type), the oil level of the oil reservoir is too low (hydraulic type).

The pedal free travel is too large.

The control valve die is broken or depressed (air pressure type), and the master cylinder piston cup leaks oil (hydraulic type).

The brake air chamber is touched or damaged (air pressure type), and the wheel cylinder piston cup leaks oil (hydraulic type).

Poor sealing of the exhaust valve of the control valve (air pressure type).

The pipe joint is loose or the pipe is broken, leaking gas or oil.

Improper adjustment of the brake shoe and brake gap, oil or dirt on the shoe skin.

Company Contact:

• Posted By: TITAN VEHICLE

• Phone: 18503815331

• Address: Jinan , Shandong Jinan, Shandong , China

• Email:

• Website: https://www.titanvehicle.com

• Business Description: TITAN Vehicle mainly serve the heavy-duty transportation, and provide the most economical hauling solutions to customers.
  
  TITAN is the best manufacturer of trailers in China.
  
  Our mainly transport equipment includes the Flatbed Trailer, Lowbed Trailer, Detachable Gooseneck Lowboy Trailer, Cargo trailer, Skeletal trailer, Tipping Trailer, Fuel Tanker Trailer, Bulk Cement Tank Trailer, Container Side Loader, Modular Trailer, Extendable Trailer for Turbine Blade and other specialized semi trailers.