Cast Iron Centrifugal Pump For River Water Containing Sand - China

Brief introduction: The hydraulic model of ZHH mixed flow pump is optimized by CFD, with the advantages of stable, high efficiency, energy-saving and low operating cost.

The ZHH series has full specifications, its pump diameter is from 200 mm to 900 mm, and therefore is able to satisfy the different capacity of various process.

It is suitable for the fluid circulation of ammonium phosphate and potash fertilizer process, and it is the most ideal pump for such processes.

ZHH mixed flow pump can be also used in the similar chemical applications to form the forced circulation of big flow of corrosive fluids with suspending particles.

Parameters:

Flow rate Q= 200~8300(m³/h)

Total head H= 5~19 (m)

Pump speed n=490~1450rpm

Fluid s.

g γ ≤1.5

Fluid temperature: T=0~105ºC

Pump diameter: T=0~105ºC Features: 1 - The hydraulic model is optimized by CFD, with excellent anti-cavitation performance.

2 - Elaborate design and manufacturing based on the fluid requirements of ammonium phosphate and potash fertilizer process, is able to satisfy various capacity requirements.

3 - The rotor part can be adjusted by the bearing housing, which enables the convenient method to recover the pump performance after slight abrasion of pump.

4 - Axial direction adjustable rotor part.

The gap between the impeller and the front cover can be adjusted to enable stable operation at high efficiency.

5 - Pump diameter from 200 mm to 900 mm.

A lot of real sales achievements for each specification.

6 - The discharge direction can be customized based on the requirements of process.

Structure: 1 - Horizontal, single stage, single suction, cantilever type, volute casing, direct coupled transmission.

2 - Back pull design.

During maintenance, the rotor part plus the pump rear cover can be pulled out from the casing without dismantle the inlet and outlet pipes.

3 - Pump shaft sealing consists of dynamic seal and packing.

4 - Bearing housing is back pull structure, and connected to pump casing by pump rear cover Application: 1 - Fluid circulation of ammonium phosphate and potash fertilizer process.

2 - Forced circulation of big flow of corrosive fluids with suspending particles.

Company Contact:

• Posted By: Sichuan Zigong Pump & Valve Co., Ltd.

• Phone: +8613738006567

• Address: No.56, Golden Hill Rd, Hi-Tech Industrial Zone, Yantan District, Zigong, Sichuan Province, Sichuan , Zigong , China

• Email:

• Website: https://www.zgpumpvalve.com/

• Business Description: Sichuan Zigong Pump & Valve Co., Ltd. shorted as Zigong Pump & Valve, is the biggest chemical pump manufacturer with full specifications in West China.
  
  It was formerly known as Zigong Pump Factory which was designated as the key manufacturer of slurry pumps and anti-corrosive pumps by the former Mechanical & Industrial Ministry of China.
  
  Now after decades' development, successfully Zigong Pump & Valve ranked itself as the essential company and is selected as the council member of Pump industrial branch of CGMA(China General Machinery Association)
  
  Located in National High-Tech Industrial Zone of Zigong City, with 160 million RMB registered capital(approximately 26 million US dollar), Zigong Pump & Valve covers an area of 96,700 ㎡which enable the annual capacity of around 10,000 pieces pumps in various series and sizes.
  
  The leading products of Zigong Pump & Valve covers four categories of slurry pumps, chemical pumps, water pumps and petrochemical pumps, including more than 600 specifications of 41 series.
  
  All the products are widely used in chemical, petrochemical, metallurgy, mining, textile, environment protection, electricity and public facilities, etc.
  
  As a High-Tech enterprise and a provincial level technical center, Zigong Pump & Valve built up a graduate workstation of fluid machinery and engineering with West China University.
  
  And by deeply working with famous design companies and universities, Zigong Pump & Valve is able to continuously focus on R & D, and provide customers optimized pump solutions.
  
  Also as the biggest chemical pump manufacturer in West China, Zigong Pump & Valve owns the most advanced pump testing center and other advanced facilities as CNC boring and milling machining center,5 meter and 3.5 meter CNC vertical lathe, resin-bonded sand process line of 20T/h, 3tAOD refining system,instant spectrum metal analyzer, etc.
  
  The mature management and strict quality control system enable Zigong Pump & Valve to pass the authentication of ISO9001: 2008, and to obtain the "National License of Industrial Products" and "Safety Certificate of Mining Machinery".
  
  Zigong Pump & Valve owns over 17 branch offices scatter among the key cities, forming the sales and after sales service network through out the whole country.