Portable Mobile Fume Extractor For Caterpillar Project 4m Arm 2m Extension Rod - China

Pulse jet self-cleaning welding dust collector & extraction with 4m arm+2m extension rod for CATERPILLAR project Product introduction

1 - Mobile intelligent welding fume extractor has two directional and two rotary polyurethane casters with brake device for easy moving and stationing.

It is suitable for the purification of fume and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious material.

2 - Suction arm can be rotated by 360 and can reach the position.

Suction arm uses high temperature resistant, flame retardant and wearablecomposite material, it will not crack after burning through byspark and has a longer usage life.

The diameter of suction arm is 160mm.

3 - The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer spark intercept metalmesh which will separate and intercept the spark initially.

And the fume enters into second layer namely filter preventer plate to avoid residual sparks enter into main filter layer directly through ramifying the fume.

At last the fume enters the third layer namely the main filter cartridge for ultimate purification.

The filtration efficiency can reach 99.9%.

4 - As the filtering precision of the main filter cartridge reach the indoor emission standards, after filtration clean air can be directly discharged indoor through the air vent in the back of the extractor.

The filter inside makes use of full automatically rotating blowing (pulse nuzzle cleaning) system for cleaning ash while connecting the compressed air source, it makes the surface of filter more clean and tidy.

So the dust collector is always keeping the constant air flow.

5 - On the control panel, it includes: - Power switch - Power indicating light - PLC implementation of filter automatically cleaning - Fan rotation direction monitor (Inside the control box) Working principle

Separation: dust laden fume are sucked into the extractor by the suction force induced by fans working, with deflector fumes flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector.

Fine fume and dust enter into filter compartment to be filtered by the filter cartridge.

The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface.

Purified air enters into the filter cartridges interior and then discharged into workshop directly or out of the workshop through pipe line.

Cleaning: When dusts accumulate continuously on filter cartridges surface, the pressure difference between its interior and exterior will increase steadily, when the pressure difference reach pre-set value(1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system.

The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridges surface, dusts fall into dust collector under gravity, thus the whole cartridges surface is cleaned.

This extractor can be automatically cleaned and manually cleaned, automatically cleaning is as following:

1 - When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation pulse blow cleaning.

2 - When the fan stops working, the system will implement rotation pulse blow cleaning for three times.

Main features

1 - CE certification and EMC test report is approvable.

2 - The voltage of 3x415V 50Hz & 3x220V 50/60Hz is available.

3 - Application for large fume occasion, it will make the arm acorrding to actual workshop conditions.

4 - Large air flow, automatically cleaning, maintaining easy, two units arms to be more competitive price.

5 - Schneider, CHNT electrics, Siemens PLC and montoring screen, USA gas-pressure switch, Japan Toray filtering material, AKZO Nobel spraying powder etc.

Technicalparameters - - - -

No.

| Item | Parameter | 1 | Fan type | centrifugal fan | 2 | Treatment of air flow | 2600100 m3/h | 3 | Motor power | 3 kW | 4 | Power supply | 3380 or 415V/50Hz | 5 | Filtration area | 20m2 | 6 | Number of cartridge filters | 2 pieces | 7 | Filter medium | PTFE coated filter element | 8 | Filtration efficiency | >99.9% | 9 | Solenoid valve | 2 pieces | 10 | Compressed air | 56 bar | 11 | Ash hopper volume | 15L | 12 | Noise | 745dB(A) | 13 | Weight | 26610kg | 14 | Dimensions(excluding suction arm) | 800(L)800(W)1633(H)mm | - - - -

Company Contact:

• Posted By: Shanghai Kaisen Environmental Technology Co., Ltd.

• Phone: 86-21-57783800

• Address: No. 6, Lane 111, Shihui Road, Songjiang District, Shanghai city,China 201600., Shanghai , Shanghai , China

• Email:

• Website: https://www.industrialfumeextractor.com

• Business Description: Being market-oriented and technology- leaded, with abundant capital and continuous innovation, we strictly abide by the tenet "Quality First, Customer Foremost", providing a clean and comfortable working environment for workers in a variety of industries.