Armor Rods Are Designed To Protect The Conductor - China

Repair Rods

Armor rods are designed to protect the conductor from bending, compression, and abrasion at the point of support.

Installation of armor rods increases the conductor's ability to withstand the fatigue forces associated with wind-sand type vibration Armor rods are designed to protect the conductor from bending, compression, and abrasion at the point of support.

Installation of armor rods increases the conductor's ability to withstand the fatigue forces associated with wind-sand type vibration; however, they do not act as a vibration control device.

Protection against flashover damage is also provided.

The degree of protection required for a particular line depends on a number of factors, and they are made of aluminum alloy or galvanized steel.

They can be used to restore the full conductance and strength rating of a line when no more than one-half of the outer strand is damaged outside the support point on a steel-core aluminum stranded wire (ACSR) or aluminum conductor.

Armor rods can be tapped on steel-core aluminum stranded wire and aluminum conductors, but not on steel ground wire.

When tapping is used, a thorough wire brushing of the conductor and the use of an oxidation inhibitor is strongly recommended.

Features of Armored Bars

Reduced abrasion

The double-layer pre-twisted armored rods wrap the overhead line conductors tightly, which well reduces the abrasion between the conductors and the armored rods.

Corrosion Resistant

The armored rods are treated against corrosion and therefore protect the conductors from corrosion.

Easy to install:

One person can do the installation.

He/she does not need experience, technical skills or special tools.

Simply install the armored rods by hand at the construction site.

Company Contact:

• Posted By: Shijiazhuang Huaneng Electric Power Fitting Co.,Ltd.

• Phone: 13630823632

• Address: No.189,Hengshan Street, Shijiazhuang High-tech Zone, Hebei Province, China., Shijiazhuang , Hebei , China

• Email:

• Business Description: Shijiazhuang Huaneng Electric Power Fitting Co.
  
  Ltd. is a new company with abilities of R&D, manufacture and trade.
  
  The company locates in No.
  
  189, Hengshan Street, Shijiazhuang High-tech Development Zone, Hebei Province, China, covering the area 26,593 square meters.
  
  Shijiazhuang Huaneng Electric Power Fitting Co.
  
  Ltd. specially manufactures preformed helical fittings which are widely used in transmission line.
  
  Currently our company owns the big ability to produce lots of varied preformed helical fitting in one year, among them OPGW and ADSS fittings for optical cables, together with fittings for conductor line and earth-wire line which is developed recently passed the tests in the national Electric Power Construction Research Institute and Shanghai Electric Cable Research Institute, and passed identification of the expert group of Hebei Economic and Trade committee.
  
  Our company was named as a high-tech enterprise by Hebei Science and Technique Bureau.