High Precision Can Bus Non Contact Angle Sensor - China

ER-AS-25 Features:

1 - Output CAN bus;

2 - Sampling rate: 1K HZ;

3 - Full range accuracy 0.05°.

Introduction ER-AS-25 adopts the combination of embedded microprocessor and numerical control angle second-level calibration device, and adopts program calibration conversion to realize the characteristics of high precision, low temperature drift and low power consumption.

Achieve CAN bus protocol, 100HZ output frequency, high resolution 0.015°, full range accuracy 0.05°.

The angle sensor uses MEMS technology to integrate the nano magnetic cluster thin film material and the differential array magnetic sensor element to produce a non-contact induction rotating magnetic field change.

The system integrates a microcomputer, voltage and current transmitters and various circuit protections.

Programmable intelligent control is set by DSP processing, linearity correction, temperature compensation, output signal standardization according to range, digital filtering, zero setting and multi-level different slopes.

The product has the characteristics of non-contact, long life, high resolution, low temperature drift, good linearity, fine reset, high frequency response, multiple protections, anti-interference, anti-vibration, and anti-shock characteristics, that is suitable for water, oil, gas, vibration, shock, especially harsh industrial environments, are also ideal alternatives to contact angle sensors (such as conductive plastic potentiometers).

Features

Sampling rate: 1K HZ

Full range accuracy 0.05°

Output CAN bus

Wide voltage input DC 9~36V

Wide temperature working -40~+85℃

Angular resolution is 0.015°

High vibration resistance>20000g

IP66 protection level

Range 0~360°(optional)

Linearity is 0.15%~0.5% Applications

Railway gauge

Satellite solar antenna positioning

Towed motor control

Mining machinery, oil logging equipment

Medical equipment

Liquid valve: angle actuators

Angle-based control

Various construction machinery angle control

Textile machinery

Company Contact:

• Posted By: ericcoinertialsystem

• Phone: 17391988506

• Address: 高新, 瑞鑫大厦, xi'an , Shaanxi , China

• Email:

• Website: https://www.ericcointernational.com/north-finders/

• Business Description: Ericco, established in 2006, is a group corporation in China and specializes in R & D and manufacture of all kinds of inertial sensors and inertial positioning / orientating / navigation / attitude measuring systems, such as MEMS gyroscope, FOG gyroscope, Liquid Floating Gyroscope, Quartz Accelerometer, MEMS Accelerometer, North Finder, IMU, INS, AHRS, etc., which are widely applied in many different industries including Aviation / Aerospace / Weapon / Ship / Electronics / Petroleum / Gas / Mining and so on.
  
  After fifteen years of development, Ericco has successfully served clients from more than 50 countries, and provided clients with excellent standard products and customized solutions for the applications of North seeking, Positioning and Orientating, Navigation, Attitude Measuring & Control, Oil & Gas downhole exploitation.