Wire Tension Clamp - China

Tension Clamp for Earth Wire

Tension Clamp For Earth Wires are for use by trained craftsmen only.

Dead-end clamps should not be used by anyone unfamiliar or untrained in their use.

Wire Tension Clamp

Tension clamps are designed to non-rigidly secure installation cables to brackets, fasteners on buildings, or utility poles.

Cable clamps are installed at the beginning and end of cable runs, suspensions, branches and turns.

Tension clamps can also be used where cables sag on large straight sections or form under the influence of increased tensile loads.

The design of the products is simple.

One of the most popular consists of a cone, a pair of plastic toothed wedges that act as clamping devices, and a steel ring.

The principle of operation is simple and consists of self-tensioning the cable using the movable wedges of the clamp.

The sale of tension clamps and their use significantly reduces the time and physical costs of installation work.

This cable attachment element offers the following advantages

There is no need to strip the insulation to expose the mating cable during use;

Simple installation, reducing the possibility of errors;

No special training of installers is required;

No special tools are required to prepare cables for installation;

Reduced risk of cable damage and compromised integrity.

Company Contact:

• Posted By: Shijiazhuang Huaneng Electric Power Fitting Co.,Ltd.

• Phone: 13630823632

• Address: No.189,Hengshan Street, Shijiazhuang High-tech Zone, Hebei Province, China., Shijiazhuang , Hebei , China

• Email:

• Business Description: Shijiazhuang Huaneng Electric Power Fitting Co.
  
  Ltd. is a new company with abilities of R&D, manufacture and trade.
  
  The company locates in No.
  
  189, Hengshan Street, Shijiazhuang High-tech Development Zone, Hebei Province, China, covering the area 26,593 square meters.
  
  Shijiazhuang Huaneng Electric Power Fitting Co.
  
  Ltd. specially manufactures preformed helical fittings which are widely used in transmission line.
  
  Currently our company owns the big ability to produce lots of varied preformed helical fitting in one year, among them OPGW and ADSS fittings for optical cables, together with fittings for conductor line and earth-wire line which is developed recently passed the tests in the national Electric Power Construction Research Institute and Shanghai Electric Cable Research Institute, and passed identification of the expert group of Hebei Economic and Trade committee.
  
  Our company was named as a high-tech enterprise by Hebei Science and Technique Bureau.