Network Lan Cable 100mhz Fluke Pass Cat5e Utp Indoor Pull Box - China

The AMPXL BOX UTP CAT5e cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).

The AMPXL cable comes from the latest generation of UTP twisted pair cables.

Its external diameter has been reduced to 5.0 mm, which considerably facilitates insertion of the cable into ducts and pipes.

Special insulation material makes it easier to attach RJ-45 connectors.

Main features of AMPXL UTP cat 5e cable:

highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee, parameters far exceeding the requirements for Category 5+ twisted pair cables

preliminary quality control of materials and thorough tests of the final product, meter markers, deviation less than 0.5%, solid wires of 0.50 mm diameter (24 AWG), wire insulation made of homogeneous, colored PE; outer diameter: 0.88 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue, insulated wires twisted in pairs of 1.8 mm diameter, pairs twisted together, outer diameter of ca.

4.0 mm, sheath made of gray/ blue PVC, of 5.0 mm diameter.

The AMPXL UTP cat 5e LAN cable is manufactured in compliance with:

IEC 61156-6, ISO/IEC 11801, ANSI/TIA/EIA-568-B, yd/t1019-2001 standards.

The AMPXL UTP cat 5e cable can be used in a wide temperature range: -20°C.

+70°C, and installed between 0°C and +50°C.

The minimum bending radius factor (radius to diameter ratio) is 8.

Specifications

Name AMPXL Cat

UTP 5e

Code 500

Structure

Wires solid copper conductors

Ø 0.50 mm (24 AWG)

Wire insulation HDPE

Sheath PVC (gray/ blue)

Outer diameter [mm] 5.0 ±0.3

Copper content [kg/km] 14.9

Weight [kg/km] 28.5

Electrical parameters

Impedance [Ω] 100 ±15

Capacitance of any transmission path at 1kHz [nF/km] 50 ±1

Nominal Velocity of Propagation (NVP) [%] 67

Resistance of any transmission path [Ω/km] ≤ 188

Asymmetry in capacitance of transmission paths to the ground [pF/km] ≤ 1600

Insulation resistance [MΩ/km] > 500

Installation and operation

Operating temperature range [°C] -20.

+70

Operating humidity range [%] 0.100

Installation temperature range [°C] 0.

+50

Minimum bending radius [radius to diameter ratio] >8

The results of the measurements of the U/UTP kat.

5e cable conducted by the

National Institute of Telecommunications in Shenzhen, China

Pair resistance and resistance asymmetry testing.

Cable Pair Wire Wire resistance [Ω/km] Resistance asymmetry [%]

UTP cat.

5e 1 a 92, 726 0, 35

b 93, 054

2 a 94, 662 0, 34

b 94, 982

3 a 96, 228 0, 55

b 96, 755

4 a 96, 107 0, 39

b 95, 733

Required - - <150 ≤3, 0

Effective capacitance and capacitance asymmetry testing.

Cable Pair Effective capacitance [nF/km] Capacitance asymmetry [pF/km]

UTP cat.

5e 1 47, 35 77

2 44, 87 132

3 45, 71 36

4 46, 70 5

Required - - ≤1600

Insulation testing.

Cable Pair Wire Insulation resistance [MΩ/km]

UTP cat.

5e 1 a 8, 8·104

b 1, 2·105

2 a 9, 0·104

b 1, 6·105

3 a 8, 1·104

b 2, 0·105

4 a 7, 5·104

b 1, 1·105

Required - - ≥50

Tests of electric strength of insulation.

Test method Test voltage VAC

Applied (passed) Required

Voltage applied between connected in parallel all a wires and all b wires 1000 1000

End-to-end attenuation testing.

Cable Pair Effective attenuation [dB]

UTP cat.

5e 1 22, 9

2 22, 8

3 21, 5

4 21, 2

Required - ≤24, 9

Near End Cross Talk (NEXT) testing.

Cable Pair to pair NEXT [dB]

UTP cat.

5e 1 - 2 43, 5

1 - 3 47, 9

1 - 4 45, 3

2 - 3 44, 9

2 - 4 47, 8

3 - 4 41, 4

Required - ≥34, 0

Return loss testing.

Cable Pair Return loss [dB]

UTP cat.

5e 1 20, 8

2 21, 2

3 20, 9

4 19, 9

Required - ≥19, 4

Total Near End Cross Talk (PS-NEXT) testing.

Cable Pair PS-NEXT [dB]

UTP cat.

5e 1 36, 94

2 33, 93

3 33, 63

4 35, 44

Required - ≥31, 0

Transmission parameters

The parameters show that AMPXL U/UTP 5e fulfills all requirements for Category 5e cables, with a large safety margin.

Company Contact:

• Posted By: SHENZHEN AMP XUNLI TECHNOLOGY CO., LTD.

• Phone: 86-13554871524

• Address: No.8, Cuilong Road，Baolong Industrial Estate, LongGang District, Shenzhen , Guangdong , China

• Email:

• Website: http://www.ampxl.com

• Business Description: We are a modern manufacturer of various kind of cables, it specialists in production, sales and service of digital communication cable, security cable, power cable, Audio/Video cable and so on.