Four Port 8dbi Antenna Uhf Long Range Rfid Reader With Wifi Easy Installation - China

Wifi Fix Four Port rfid reader long range With 8dbi Antenna for warehousing Product Advantage # Provide four TNC antennae interfaces, users can achieve superior reading performance with less equipment deployment.

# Enhanced noise suppression function for reliable data capturing.

# High precision return signal strength (RSSI).

# Excellent performance of anti-interference and lightning-proof design.

# Aluninium alloy enclosure, rugged and durable, remarkable performance of heat dissipation.

# Aesthetic appearance, easy to install.

# Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity and the highest performance in this field make this module more suitable for harsh application environment.

# Remarkable performance, can achieve a reading distance over 8m for single tag reading with 8dbi RF antenna.

# Remarkable performance in intensive taps reading can attain a tags identification rate of 400tags/s.

# Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.

# Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.

# The use of carrier wave cancellation technology makes the tags reading more accurate and reading scope wider.

Technical parameters - - - - Name | Parameters | Remark | Reader Chip | R2000 | | Tag Protocol | EPCglobal UHF Class 1 Gen 2/ISO 18000-6C | | Working Frequency | 840960MHz | | Supporting Working Area | China, Europe, the United States, South Korea, Japan, Taiwan | | Operating Voltage | 12V | DC power supply | Maximum operating current | 1A | Test of transmit power in 30dBm state | Standby current | 80mA | | RF port maximum output power | 1W(30dBm) | | Working Temperature | -25+65 | | Working Humidity | 95%(+25) | | Storage Temperature | -40+80 | | Receiving | -82dBm | | Antenna interface impedance | 50 | | Serial communication parameters | Baud rate adjustable(default 115200bps), parity bit: 0, data bit: 8, stop bit: 1 | | Power output settings | 530dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm) | | DRM mode | support | | RSSI | support | | High temperature automatic protection function | support | | Power supply enable | support | | GPIO interface | 3-Road GPIO can only input can not be input, GPIO port default is low, the output high level of 5V, GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer | | buzzer | support | | LED lights | Power indicator: Red Status indicator: Green | | Communication Interface | USB, RS232, RS485, Ethernet | Only one of the communication interfaces on the F5860-H can be used alone.

Do not communicate with each other at the same time.

| Antenna interface | Four TNC | The F5860-H working antenna defaults to antenna 1 - Antenna parameters can be configured: working antenna, working time, interval time.

| dimension | 26.5*25.0*4.5CM(including bracket) | | Accessories | 12V/3A Power Adapter: 1 Serial line: 1 root | | - - - - PIN Green Terminal Interface Definition - - - - Pin NO.

| Name | Description | Remark | 1 | 485-B | RS485 B | | 2 | 485-A | RS485 A | | 3 | EN_OUT | Equipment enable control interface, When the high level input, the device will be in a state of sleep.

The high level voltage is 5V.

| | 4 | GPIO1 | GPIO port output, can be programmed to control the level of output.

The output high level is 5V, the low level is 0V.

The maximum output current is 100mA.

(The default output level is low level 0V) | | 5 | GPIO2 | the same as above | | 6 | GPIO3 | the same as above(note: Equipment has occupied this interface for the green LED lights and buzzer control) | | 7 | NC | Reserved interface, no function | | 8 | NC | Reserved interface, no function | | 9 | WIFI_RESET | Device WIFI configuration parameter reset pin, this pin and the GND pin short to 10 seconds to restore the factory settings WIFI.

| | 10 | GND | Signal reference.

| | - - - - Application Access Control and Time Attendance Asset Management Container tracking and Logistics Laundry Library Payment Retail Supply chain Warehousing Waste management Automatic Vehicle ID and Access Control Car Parking Mining Auto-ID Medical Technology Food Logistics and ID

Company Contact:

• Posted By: SUNSHINE RFID Technology Co.,Limited

• Phone: 86-755-88363356

• Address: 6th floor,West Tower,BLDG 2,Minqi Science and Technology Park, No.1 Pingshan Road, Xili Street, Nans, Shenzhen , Guangdong , China

• Email:

• Website: https://www.uhf-rfidreader.com

• Business Description: SUNSHINE RFID Technology Co., Limited is a high-tech enterprise specializing in the development, manufacture and sales of top quality UHF RFID products and active RFID products.
  
  We focus on the development and sales of UHF RFID modules, readers and tags, and 2.45GHz RFID readers, tags, etc.