Relight 16 Plant Led Flowering Grow Lights 480w 500w Full Spectrum For Indoor - China

Relight 16 Plant LED Flowering Grow Lights 480w 500w Full Spectrum For Indoor 2017 Relight 16 plant grow led light 480w 500w RED BLUE 630NM: 460NM 160: 80 led grow light full spectrum For - - - - LED Qty | 80Leds | Input Voltage | 85-265V AC | Power | 480W | CRI | 80 | Output lumen | 8500lm | Size | Dia116*295mm | Lifespan | >50, 0000 hours | Working Temperature | -20~50 | Materail | Aluminum | Color Temperature | 2700-7000K | Certificate | CE, RoHs SAA UL | Cover | Frosted/Milky | Warranty | 3years warranty | IP rate | Ip65 | Bean angle | 120/180/210 | Color | red, blue/red/blue/orange/IR or mix color | Color wavelength | 630nm /460nm, 630nm, 460nm or 610nm/730nm | - - - - Features: High quality LED 3w chip + 630 MA current 630MA is the best 3 w LED drive current, current is too big or too small, can't make 3w LED chip play the best performance.

Below current of 700 MA cannot make 3w chip material waste of resources; And higher than the current of 700 MA is easy to make the depletion of 3w LED chip; Modular assembling design Each part of the design is to follow the concept of modularity, directly by the male female plug connected to each other, lamps and lanterns is very easy to tear open outfit, replacement and maintenance; Over heat protection When the hot plate temperature exceeds 65 C, intelligent temperature control will automatically cutoff the power supply system, for the temperature cooled to 50 C, the system will be automatically open.

3W chip high quality LED lighting source, the lifespan is over 50000 hours.

Replace 3~5 times of the HPSL power, 60%-80% electric energy saving than MH HPS lights High lighting effect, 90% of the light will be absorbed by the aquatic plant, AC100V~240V, suitable for the world standard.

Revolutionary heat dissipation design, availably alleviate the internal thermal cycle, 10-15 lower than its precursor in performance.

Intelligent monitor system, ensure the whole equipment in a good working state.

Advanced isolated power driver, UL standard output voltage which is lower than 45V DC.

Soft starting protection to avoid the transient currents impact, effectively protecting the LEDs from high voltage damage.

Aluminium shield design, housing available for various colors.

Modular assembling, no glue and glass design, very easy for repairment and maintenance Built with optical lens, the penetration is more outstanding., can be as much as 10-15 times powerful, available four options of lenses(60 degree, 90 degree, 120 degree).

Customers can choose the different ratios.

The suggested wavelength: red: 630nm 660nm; blue: 430nm 460-470nm; orange: 610-615nm; white: 6500k With the mixture of red, blue, orange, yellow, UV, IR and white lights, provide the plants needed nutrient light.

The red and orange LEDs are good for sprouting and flowering, while the blue LEDs promote the growth, at the same time, customers also can choose the more suitable wavelength and LED colors.

Product Description Product Details 120-240V AC, 50/60Hz input Available in 1800K and 2100K color Standard interface: E26/E27/B22 Option in dimmable driver No UV and IR output 2 years warranty Installation Process I.

Please make sure that the power is off before you do any operation to the product.

II.

Retrofit the incandescent bulb with the LED bulb or do a new installation.

obey the diagram as below.

III.

Remove the original starter Material Used We use unibody of aerospace aluminum, supper thick heat sink in flower shape, Precision work, with high efficiency in heat dissipation, lowing light failure.

Big screw, supper thick heat sink in flower shape Experiment Display Scenario shows 1 - LED red light with 660nm, blue light 450-470nm bandwidth light, Best fit for photosynthesis, well fill-in light 2 - No radiation, little heat emitting, safe and environment friendly 3 - life span up to 50000h 4 - Especially generate obvious effect to succulent plants, forming good and full shape of green plants, easy colored, with homogenous colors.

Applications Why us Relight? High Quality Our CE/RoHS standards insure quality assemblies from start to finish.

Whether it's a simple custom product or a complex turnkey production run, Relight will adhere to the highest quality standards.

Super Capable Relight offers the latest in assembly capabilities and qualifications insuring that quality is built into every product we produce.

Many years' Experience When it comes to your build you want a partner you can depend on.

Our management team has over 8 years of combined industry knowledge.

O ur engineering team has over 10years experience.

Customer First Protecting your Intellectual Property is job one! Our staff of trained professionals are all working under a strict confidentiality contract and treat your important documentation as they would their own.

Professional Engineer We pride ourselves on our ability to custom tailor programs around our customers' needs.

Contacts:

Company Contact:

• Posted By: Shenzhen Relight Technology Co.,Ltd

• Phone: 86-755-33691713

• Address: 6th Floor, Building A, Guancheng Industrial Park, Gongming Town, Guangming District, Shenzhen, 51800, Shenzhen , guangdong , China

• Email:

• Website: https://www.smdledmodules.com

• Business Description: Shenzhen Relight Technology Co., Ltd. is professional in the designing, producing LED Module, such as normal DC module, high voltage AC module, RGB module, dimmable module, and customized deisgn module based on specific project.
  
  Relight is exporting to the global customers.