Single Port Uhf Rfid Reader Writer For Tracking Orientation Oem Odm Acceptable - China

Impinj R2000 Single Port Development Board UHF RFID Reader Module/UHF RFID Module Welcome OEM Product Introduction # UHF RFID module is a high-performance reader/writer designed for high challenging RFID application environment.

It employs the newest R2000 RF chip providing the customers unprecedented performance of reading and writing experience.

The maximum power output of this module is 30dBm, with 8dbi antenna, which can realize a efficient reading/writing distance of 10m or above, and over 400tags/s for tags identification.

Meanwhile, the compact design makes this module smaller, coupled with the low working voltage of 3.7V; the module is particularly suitable for application in a device such as a handset.

# This product is suitable for RFID intensive and more challenging environment and required a higher reading/writing performance, such as warehousing, logistics, production line management, etc.

Product Advantages # Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.

# High precision return signal strength (RSSI).

# Employed IMPINJ R2000 RF Chips, up to 110dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment.

# Remarkable performance with 8dbi RF antenna, can achieve a reading distance over 10m per single tag.

Product Electrical Parameters - - - - NO.

| Name | Reference | 1 | Working Voltage | DC 5.0V | 2 | Working Current | 1.5A | 3 | Standby Current | 50mA | 4 | Sleep Current | 1mA | 5 | Working Temperature | -25 -- +65 | 6 | Working Humidity | 95%(+25) | 7 | Storage Temperature | -40 -- +80 | 8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C | 9 | Working Frequency | 840960 MHz | 10 | Supporting Working Areas | China 1, China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan Korea Malaysia Taiwan | 11 | RF IC | Impinj R2000 | 12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm | 13 | Output Power Flatness | 0.2 dBm | 14 | Receiving Sensitivity | -110 dBm | 15 | RF Port Standing Wave | 1.5 | 16 | Maximum Reading Distance | 10m (With 8dBi antenna/Relate to tags type, transmitted power and application environment) | 17 | Multi-tag Reading | 400 tags/s | 18 | Antenna Interface Amount | Four (MMCX) | 19 | Interface Communication Rate | 115200 bps | 20 | Working Temprature Detection | support | 21 | Intensive Read/Write Mode DRM | support | 22 | Antenna Connection Protection | support | 23 | RSSI | support | 24 | LED | Red light (power indicator ) | 25 | Product Cooling Way | Aluminum metal case as cooling fin for the module | 26 | Dimension | 76.4*40.3*7.0MM | - - - - Interface Definition - - - - Pin NO.

| Name | Type | Description | 1 | UART_TX | I/O | TTL UART Transmit | 2 | UART_RX | I/O | TTL UART Receive | 3 | GPIO3 | I/O | Output | 4 | GPIO2 | I/O | Output | 5 | GPIO1 | I/O | Output | 6 | PWREN_MODULE | I/O | When Pull Down This Pin to Ground, The Module Enter Sleeping Mode.

| 7 | GND | Ground | Ground | 8 | 9 | VCC | Power | DC 5V Power Input.

| 10 | - - - -

Company Contact:

• Posted By: SUNSHINE RFID Technology Co.,Limited

• Phone: 86-755-88363356

• Address: 6th floor,West Tower,BLDG 2,Minqi Science and Technology Park, No.1 Pingshan Road, Xili Street, Nans, Shenzhen , Guangdong , China

• Email:

• Website: https://www.uhf-rfidreader.com

• Business Description: SUNSHINE RFID Technology Co., Limited is a high-tech enterprise specializing in the development, manufacture and sales of top quality UHF RFID products and active RFID products.
  
  We focus on the development and sales of UHF RFID modules, readers and tags, and 2.45GHz RFID readers, tags, etc.