Seamless High Carbon Steel Pipeastm A333 Grade 1 Oil Gas Water Delivery Application - China

Seamless High Carbon Steel Pipe A333 Grade 1 Oil Gas / Water Delivery Application ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures.

Several grades of ferritic steel are included.

Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

1 - Standards: ASTM A333: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service 2 - Application: Oil, Gas and water delivery; Refinery, Boiler and Mechanical equipment manufacture; structure construction; drilling, ship building and etc.

3 - Ordering Information Quantity (feet, centimeters, or number of lengths), Name of material (seamless pipe), Grade (Gr.

1), Size (NPS or outside diameter and schedule number of average wall thickness), Lengths (specific or random), End finish Optional requirements Test report required 4 - Chemical Requirements - - - - Chemical Composition % Gr.

1 | Carbon (C) max | Manganese (Mn) | Phosphorus (P) max | Sulfur (S) max | Silicon (Si) | Nickel (Ni) | Chromium (Cr) | Copper (Cu) | Aluminum (Al) | Vanadium (V) max | 0.3 | 0.40-1.06 | 0.025 | 0.025 | | | | | | | - - - - For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese.

When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted.

However, the addition of elements required for the deoxidation of the steel is permitted.

5 - Manufacturing Process Raw Material Inspection Cold Centering Heating Piercing & Rolling SIzing Heat Treatment Testing Finishing NDE Visual & Dimension Inspection Marking Storing & Shipping 6 - Mechanical Properties Tensile Strength, min: 55 ksi/380MPa Yield Strength, min: 30ksi/205MPa 7 - Available Size Range - - - - OD | Thickness | mm | inch | mm | SCH | 21.3~1422 | 1/2''~ 56'' | 2.11~140 | SCH10 | *If the steel grades and size you are looking for are not listed above, please contact us for further information.

| - - - -

Company Contact:

• Posted By: Xi an Overseas Oilfield Services Co., Ltd.

• Phone: 86-29-89584808

• Address: C-1102, Van Metropolis, No. 35, Tangyan Road, Xi'an, China, Xi an, shanxi , China

• Email:

• Website: https://www.seamlessalloysteelpipe.com

• Business Description: Since 2008, XOOS has been engaged in seamless alloy steel pipe, carbon steel pipe, and stainless steel pipe distrubtion industry.
  
  With the support of our strategic partners like Chengde Group, Hengyang Group, TPCO, Baosteel, Jiuli, etc.