How To Operate The Vertical Leaf Filter Cooking Oil Machine - China
price: 8000.00 Dollar US$
Operation process and requirements of vertical leaf filter :
First, open the inlet valve is heated to 65-90 ℃ slag containing crude oil or material pumped into the bottom inlet after about 30min until full.
Open the oil valve chamber when the pressure is gradually increased by about 0.2-0.4MPa.
By this time absolutes outside of the filter chip into the chip, the lower part of the discharge tube set, and by observing the clarity of the oil pipeline.
Greaves are constantly deposited on the outside of the filter, until such time as the two adjacent pieces filter cake is not in contact must be drained.
Filtration cycles required in accordance with the amount of slag containing oil and the nature of the approximately 1.5-2.5h.
The filter starts when the oil is very turbid, it can be direct steam (0.5MPa) valves cake was blown dry for about 30min, causing oil cake was less than 20% requirement.
This oil is discharged when drying is also sent back to the tank.
Then open the butterfly valve and clean the canister, and then open the valve so that air entering the vibrator starts vibrating 1-2min, generally drier cake if you can dismount 1min cake.
Finally, close all valves and butterfly valves for the next filtration cycle.
In order to achieve filtering "Intermittent - continuous" production, generally use two filter-parallel operation.
Company Contact:
- Phone: 008613526615783
- Address: No.133 Yaozhai Road, Jinshui District, Zhengzhou City, Henan Province, China, zhengzhou , henan , China
- Email:
- Website: http://www.cassavaprocessing.com
Published date: December 14, 2016
- Business Description: Doing Holdings - Henan Jinrui Food Engineering Co., Ltd can provide cassava flour machine & cassava starch machine & garri processing machine.
DOING Company has professional and experienced engineers for technical support and installation service.
Related listings
-
Palm Kernel Expeller LineManufacturing technologies - Doing Holdings - Henan Jinrui Food Engineering Co., Ltd - China - December 12, 2016 - 9000.00 Dollar US$
In larger mills, the palm kernels are normally separated from the shells using a mechanical process involving winnowing (separating the husks or seed coat from the oil-bearing material) and hydrocyclones (a static device that applies centrifugal forc...
-
Rice Bran Oil Press MachineManufacturing technologies - Doing Holdings - Henan Jinrui Food Engineering Co., Ltd - China - December 12, 2016 - 8000.00 Dollar US$
Features of rice bran oil press machine: 1, divided into secondary crushing, Section 1-2 squeezer as the first level;Section 3 - 7 for the second level.The total compression ratio of 12; 2, squeezer range ring off between intermittent type tooth form...
-
Rice Bran Oil Mechanical Compression ProcessManufacturing technologies - Doing Holdings - Henan Jinrui Food Engineering Co., Ltd - China - December 12, 2016 - 8000.00 Dollar US$
Rice bran mechanical compression process, rice bran is rice processing byproducts, rice bran layer from the large Mi Maipi in preparation of oil, rice bran oil 15% -22%. Rice bran oil is a high quality edible oil, contain the growth of health promoti...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"