Crc Copper Paste Antisieze Compound - India

CRC Copper Paste Antisieze Compound

1 - GENERAL DESCRIPTION for CRC Copper Paste Antisieze Compound

High temperature anti-seize lubricant.

CRC Copper Paste is a soft, copper-coloured paste, based on micronised copper powder and synergistic anti-oxydant, anti-corrosion and anti-wear additives suspended in a premium grade stable oil.

It is an effective anti-seize formulation, preventing metal-to-metal contact, seizing, galling, and fretting corrosion.

2 - FEATURES of CRC Copper Paste Antisieze Compound

Reduces friction and wear, even when the base oil has already evaporated.

High pressure and high temperature resistance.

Ensures accurate assembly.

Enables easy disassembly of threaded parts, gaskets and flanges, even after long operational periods.

Threaded parts remain in good condition and can be re-used.

Separating film ensures favourable release behaviour of the threaded connections.

Excellent sealing even in corrosive atmospheres.

Resistant to hot and cold water.

Lead-free and nickel-free.

Aerosol formulation does not contain chlorinated solvents and uses hydrocarbon propellant.

3 - APPLICATIONS of CRC Copper Paste Antisieze Compound

An effective anti-seize lubricant for : Bolts, nuts, pins

Screw connections on hydraulic equipment

Guides for brakes

Bushings, fittings

Brake adjusters

Spark plugs

Splines

To absorb disk brake noise.

Wheel screws

Flanges, flange seals

Pipeline connections

Exhaust screw connections

Linkages

Sliding sleeves / shafts

Press fits.

The surfaces to be treated should be clean, dry and grease-free.

Wirebrush scaled parts and clean with an oil-free solvent like CRC Industrial Degreaser or CRC Fast Dry Degreaser.

A thin, even film should be applied either by spraying or by brushing.

Assembled parts (gear teeth, screws, .

) can slowly be put in motion.

Avoid mixing with other products.

Test before use on plastics or rubber.

Do not use on energised equipment, oxygen systems or in presence of acetylene.

Use aerosol only in ventilated areas.

A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

5 - TYPICAL(*) PRODUCT DATA (without propellant)

Appearance : homogenous, copper coloured

Aerosol properties

Flash point (open cup) : < 0°C

Boiling range (solvent) : 60-95°C

Vapour density (vs.

air=1) : 3

Specific gravity (@ 20°C) : 0, 81

Dry film properties

Specific gravity (@ 20°C) : 0, 99

Flash point (open cup) : > 200°C

Dropping point : none

NLGI consistency : 1 - 2

Low temperature stability : -30°C

Temperature resistance **

- lubrication : 300°C

- anti-seize : 650°C

Hot water resistance (DIN 51807 T1, 40°C, 90°C) : 1

Corrosion (DIN 51802) : 0/0

Four Ball Wear (DIN 51350 T5, 1h, 500N) : 0, 5 mm

CRC AEROSOL, ELECTRICAL MAINTENANCE Spray, CRC 2-26, CRC CO CONTACT CLEANER, CRC LECTRA CLEAN, CRC N F Precision, ONLINE CONTACT CLEANER, CRC URETHANE ISOLATION RED, CRC PLASTIC 70, CRC BATTERY TERMINAL COATING, CRC 3-36, CRC 5-56, CRC GASKET REMOVER, CRC FAST DRY DEGREASER, GALVABRITE, CRC RUST REMOVER, CRC COPPER PASTE, CRC METAL FREE PASTE, CRC HAND CLEANER, CRC ANTI FRICTIONAL TEFLON COATING, CRC FREEZE 75, CRC SP-400, CRC SP - 350

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.