Crc Food Grade Silicone Spray - India

CRC Food grade Silicone Spray

1 - GENERAL DESCRIPTION

Synthetic lubricant and release agent.

Based on a premium grade silicone fluid exhibiting superior lubrication.

CRC Silicone reduces friction in most metal and non-metal applications.

The silicone lubricating film meets USDA-regulations for use in food processing applications where incidental food contact with the lubricant may occur.

2 - FEATURES

Formulated using only food grade acceptable components

Forms an inert, stable, non-hardening film.

Eliminates squeaking, binding and sticking of metals, plastics, rubbers and other surfaces.

Low surface tension gives better coverage and deeper penetration.

Excellent separation and release properties.

Colourless, tasteless and odourless.

Effective over a wide temperature range.

Harmless to most rubbers and plastics (test prior to use).

Aerosols are pressurised with non-flammable CO2 , giving an active product content of 97%.

Meets FDA-regulation CFR 21-178.3570 and is authorised by USDA - class H1, to be used as a lubricant with incidental food contact.

3 - APPLICATIONS

Lubricant for :

Food processing and handling equipment

Chutes

Guides

Rails

Conveyors

Bottling machinery

Slicers

Ovens

Freezers

Knives and saws

Any food industry lubrication point.

Release and separating agent

4 - DIRECTIONS

Spray light, even film on areas requiring lubrication or protection.

Use extension tube for hard-to-reach areas.

Repeat application if necessary.

Excess or spilled product can be removed with CRC Foodkleen.

Do not use on energised equipment.

Do not use on areas to be painted.

A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

5 - TYPICAL(*) PRODUCT DATA (without propellant)

USDA category : H1

Appearance : clear, water-white liquid

Specific gravity (@ 20°C) : 0, 69

Distillation range of solvents : 55-70°C

Flash point (closed cup) : < 0°C

Vapour density (vs.

air = 1) : 3

Dry film properties

Flash point (closed cup) : > 300°C

Pour point : < -40°C

Temperature range : -40 to +200°C

Long term stability temperature (in air) : 150°C

Surface tension : 21 mN/m

Dielectric strength : 35 kV

Viscosity (@ 20°C) : 12.500 mPa.

s

CRC AEROSOL, ELECTRICAL MAINTENANCE Spray, CRC 2-26, CRC CO CONTACT CLEANER, CRC LECTRA CLEAN, CRC N F Precision, ONLINE CONTACT CLEANER, CRC URETHANE ISOLATION RED, CRC PLASTIC 70, CRC BATTERY TERMINAL COATING, CRC 3-36, CRC 5-56, CRC GASKET REMOVER, CRC FAST DRY DEGREASER, GALVABRITE, CRC RUST REMOVER, CRC COPPER PASTE, CRC METAL FREE PASTE, CRC HAND CLEANER, CRC ANTI FRICTIONAL TEFLON COATING, CRC FREEZE 75, CRC SP-400, CRC SP - 350

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.