Molykote P 37 Lubricant Paste - India

MOLYKOTE P 37 Lubricant paste

Extremely pure, solid lubricant paste for bolted joints.

It contains no lead, nickel, sulphur, chlorine or fluorine.

Temperature resistant upto 1400 degrees Centigrade.

Molykote P 37 APPLICATIONS:

MOLYKOTE P 37 is Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat resistant steels, eg those made from nickel-based alloys.

Used successfully for the bolted joints of gas and steam turbines in power stations.

Molykote P 37 FEATURES:

Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant)

Molykote P 37 can be used at temperatures up to 1400 Degrees Centigrade

Coefficient of friction in the range of oiled bolts

Low scatter of prestressing force on tightening

Molykote P 37 Avoids stress cracks and solder brittleness

Molykote P 37 Enables non-destructive loosening of bolted joints even after long use at high temperatures

Molykote P 37 SPECIFICATIONS:

Complies with Siemens TLV 9600 02/01

Complies with General Electric TIL 1117-3RI

Complies with EDF-PMUC 04034

Complies with Pratt & Whitney PWA-36246

Molykote P 37 COMPOSITION:

Solid lubricants in practically sulphur free, Partly synthetic oil, Thickener, Adhesion improver,

Technical Specifications of Molykote P 37

Color : Grey-Black

Penetration density Tested As per : ISO 2137 - Unworked penetration -mm/10 - 280-310 & ISO 2811 Density at 20 degrees Centigrade (68F) g/ml 1.2

Service temperature : -40 to 1400 Degrees Centigrade ( -40 to 2552 FT )

Load-carrying capacity, wear protection, service life

DIN 51 350 T.

4 Weld load N 4400

DIN 51 350 T.

5 Wear scar under 800N load mm 1.7

Coefficient of friction

Screw test - thread square 0.15

Screw test - headsquare0.09

Initial breakaway

torque cube per Nm 126

How to apply Molykote P 37

Clean the thread with solvent.

Clean already used bolts with a wire brush.

Spread an adequate amount of this product up to the root of the thread in order to obtain a good seal.

For this purpose use the brush from the brush can, provided it has not been used previously for other purposes.

Otherwise use a new brush .

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.