Mild Steel Square Tube Roll Forming Machine - China

Steel round tube how to change into square tube.

Square tube roll forming machine is your best choice.

Easy operation and cheap price.

Round tube change into square tube forming machine operation guide 1 - Develop safe operating procedures.

Do not touch the mold during the operation of the unit.

If you need to touch it during work, your hands should be placed in the direction of the pipe.

Operators should have fixed positions, not change at will, and keep a record of shifts.

2 - Before driving, check whether the lubrication points of the steel square tube forming machine are filled with corresponding lubricants.

Pay special attention to the high-speed lubricating grease that is relatively high-temperature resistant to the main shaft of the flying saw.

Fill it once every two days, two or three times each time.

It should not be added too much.

If the heat dissipation is not good, it will cause excessive heating and even bearing dead.

3 - The temperature of the welding extrusion is too high.

It is recommended to use a synthetic composite aluminum-based grease (SY1414-80) that can withstand high temperatures and use under humidity conditions.

The large hexagonal nut and the upper pull plate should be adjusted at the same time to avoid that the squeeze roller is not perpendicular to the plane of the worktable, which may damage the thread of the squeeze roller.

At the same time, pay attention to check the squeeze roller bearings.

The working environment here is harsh and the bearings are easily damaged.

If abnormalities are found, the bearings should be replaced in time to avoid greater damage.

30*30/25*38 Square tube forming machine technology (Steel tube thickness less than 3.5mm) Model SP-T506075

Motor power 7.5KW

Reducer 350 type

Feed material iron pipe

Feeding round tube diameter 1.5 inch (cun)

Forming Roller 8 forming + 2 straightening

Working speed 10 meters / minute

Roller material GCr15 heat treatment after finishing

Spindle material 40Cr after quenching and tempering

Transmission mode 1.2 inch chain sprocket drive

Company Contact:

• Posted By: Shenzhen Superda Machine Co., Ltd

• Phone: 8618814355377

• Address: No.95, Ainan Road, Longdong District, Longgang Area, Shezhen, Shenzhen , Guangdong , China

• Email:

• Website: https://www.superdamc.com

• Business Description: Metal Enclosure Roll Forming Machine Manufacturer
  
  Shenzhen Superda Machine Co., Ltd is China roll forming machine manufacturer which professional in fabricating customized metal sheet forming line.
  
  Electrical enclosure roll forming machine, distribution cabinet box production line, fire hose reel cabinet roll forming machine, fire extinguisher cabinet box equipment etc.