225l Energy Efficient Temperature Test Chamber For Electronic Devices - China

225L Energy-efficient Temperature and Humidity ChamberFor Electronic Devices 1 - Features Use South Korea SAMWONTEC 5.7 InchLCD touch screen controller, with PID control parameter settings Flexible data collection and recording method Temperature and humidity settings (SV) Actual (PV) values can be displayed directly, The execution of the program can display numbers, paragraphs, remaining time and cycles, run time display, Program editing and graphics curve display, Fixed or program running status display 2 - High temperature limits of test chambers There are many types of test rooms, but they all have high and low temperature limits.

Let's take a look at the typical high temperature thresholds and why they exist.

The test chamber typically has a wire heater made of a material called Nichrome.

By placing a continuous heating bead, a greater amount of heat is produced.

The result looks like a toaster inside.

The fan circulates the air through the heater, so the indoor sample is not exposed to radiant heat.

It is very easy to add a heater and increase the speed and / or upper limit of the chamber.

The SANWOOD chamber typically has a high temperature limit below 200 C.

This is why a room of high temperature restrictions exist in the decomposition: 3 - Standard Met and Implemented GB/Bb T2423.2-89 high temperature test method GB2423.1-89 test A: low temperature test method GJB150.4-1986 test at low temperature IEC60068-2-1 low temperature test method IEC60068-2-38 temperature cycle IEC60068-2-78 constant humidity temperature MIL - STD - 202G - 103B humidity test IEC60068-2-30 humidity temperature cycle GB/T2423.3 constant humidity heat test method 4 - Temperature Humidity Test Chamber Parameter Specifications The specifications is measured in the environment of + 25, temperature and humidity performance measurement comply with related regulation of IEC60068-3 standard; Sensors placed in the air outlet.

- - - - Model | SMC-225-CA | Temp.

range | 0C 150C | Display resolution | 0.1C | Temperature stability | High0.5C, low 1.0C | Temperature uniformity | 2.0C | Heat up time | 0C +100C, within 45 min | Pull down time | +80C 0C, within 60 min | Interior material | Stainless Steel Plate ( SUS 304) | Exterior material | A3 plate | Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | Total power | 7KW(heater 3KW included) | Max current | 13.6A | Ambient Temp.

| +5C +35C | Power Supply | | AC 380V10 50Hz, 3 phase 4 wires +Ground Wires | Weight | 420KG | Sight window size | 450 X 450mm | Sample holder | 2 pcs | Fittings | cable port(port50mm)*1, size is optional | Safety device (standard) | No fuse breaker, over pressure, over heat&over current protect, over temp.

protect, over load protect for blower, dry heat protect | Control System | Balanced Temperature & Humidity Control (BTHC)System | Refrigeration system | Air Cooled (Water Cooled is option) | Hermetic compressor | Double stage refrigeration system, R408 AND R23 | Controller | 5'7-inch LCD Touch Screen panel | Operation model : Program or fix point running | Memory capacity : 120programs, 1200steps, | All repeat 999 cycles, part repeat 99 cycles | Note: 1 - We reserve the right to change specifications without prior notice 2 - Customized sizes and configurations available | - - - - 5 - Advantages --- Why SANWOODIS Your Right Choice? You can get more from other suppliers.

1 exquisite touch and excellent user experience 2 - Large glass window design, omnidirectional viewing angle, hollow plating film and anti-condensation design; Built-in LED light, easy to test the process of real-time observation of the state; two-door design, the internal glass door with access hole, easy operation.

3 - Inner chambermaterial for the SUS304 # installation of stainless steel imports, the outer box for the steel, paint the application of automotive coating technology.

Box with triumph processing machine forming, beautiful appearance.

4 - Large-size full-color LCD touch screen display, easy to operate, easy to edit the program.

PID has automatic calculation function; self-diagnosis function, step by step display failure message and fault shooting solution.

5 - An RS-232 and RS-485 communication interface, supporting the recorder, scalability.

We also support PC via wifi or line for remote control (recommended).

Company Contact:

• Posted By: Guangdong sanwood instrument technology company

• Phone: 86-769-81182799

• Address: NO.88 Songchang Road,Songbotang,Changping ,Dongguan,Guangdong, Dongguan , Guangdong , China

• Email:

• Website: https://climatic-chambers.sell.everychina.com

• Business Description: Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields.