Small Scale Palm Oil Making Machine With Capacity 1 5tph - China

Our Small scale palm oil making machine was designed to achieve crude palm oil from palm fruits and bunches.

This type of Small scale palm oil making machine adopts mature and reasonable design, assuring high capacity of crude palm oil, low energy consumption, low cost and low environmental pollution.

Small scale palm oil making machine process are as follows:

Plam fruit——Sterilizer —— Thresher —— Digesting & pressing ——Crude palm oil clarification ——Palm oil drying machine —— Palm oil packing machine The Fresh Fruit Bunches(FFB) is available after 3 yeas plantation.

Palm fruits are sent into crude palm oil processing plant with following production process: Weighing.

Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost subsequent.

Unloading fruit.

Fresh Fruit Bunches (FFB) are sent to fermentation tank through transportation machinery after sieving and impurities removing.

The time from picking up to fermentation should be less than 24 hours, or the free fatty acid(FFA) will rise, which will not be conductive for further processing and production of palm oil from new technology palm oil making machine.

Sterilization.

FFB will pass high pressure and high temperature sterilization after entering fermentation tank.

It will soft and make sterilization for FFB.

Threshing.

Threshing machine will separate both palm fruits and empty fruit bunches(EFB) after FFB soften during fermentation.

(Empty fruit bunches (EFB).

EFB are sent to send to garden as fertilizer, fuel or other purposes after conveying and hoarding.

) Digesting.

Mixing tank will mesh and crush palm fruit until broken after fruit threshing.

Pressing.

The crushed palm fruit will be leaching out from screw extrusion of palm oil pressing machine.

Fiber separation.

The extrued fiber pie enters air separation system after crushed to get separation of fibers and cores.

Separation.

Crusher divided fruit core into palm kernel and shell after separated with fiber.

Air separation and washing systems separate palm kernels and shells.

Shells enters boiler system as fuel, and palm kernels are storage after drying.

Oil clarification.

Crude palm oil (CPO) contains moisture and impurities after palm oil pressing.

CPO begins primary treatment through sand tank and screen, enters vertial clarification tank to make heating and stirring, and finally separate into waste oil and edible vegetable oil.

Edible vegetable oil is sent to crude oil storage tank after drying.

Company Contact:

• Posted By: Henan Doing Mechanical Equipment Co., Ltd

• Phone: +86 13526627860

• Address: No.133 Yaozhai Road, Jinshui District, Zhengzhou City, Henan Province, China , zhengzhou , Asia , China

• Email:

• Website: http://www.palmoilprocessingmachine.com

• Business Description: Henan Doing Machinery Equipment Co., Ltd. has been dedicated to the research and development of large, medium-sized and small -sized palm oil processing machine and a variety of edible oil extraction machine for years.
  
  We are professional manufacturing enterprise which gather development, design, production, sales, installation and after-sales service in one.
  
  Our palm oil processing machine and palm kernel oil processing machine have gained many achievements and awards.
  
  And we have installed palm oil processing machine in more than 30 countries over the world.
  
  Such as Malaysia, Indonesia, Thailand, Nigeria, Liberia, Kenya, Ghana, Cote d'Ivoire, Congo, Zambia and so on.
  
  http: //www.
  
  palmoilextractionmachine.
  
  com
  
  http: //www.
  
  edibleoilextractionmachine.
  
  com