Automatic Particle Board Production Line - China

1) Chip preparation section Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin 2) Drying and sifting section

The flskes discharged from the wet flake bin are conveyed to the rotary dryer.

Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.

3) Forming and hot-pressing section

The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly.

After process of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot pressing.

Rough boards after pressing are pushed to unloader via pallet.

4) Cooling and sizing section

The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

5) Sanding section

The board are sanded, checked and stored.

PLC control is used in mat-forming section.

Company Contact:

• Posted By: Linyi Metro Int'l Trading Co., Ltd

• Phone: +8615254920677

• Address: Beiyuan Rode, Linyi , Shandong , China

• Email:

• Business Description: Linyi Metro Machinery Co., Ltd was founded in 1989 year, the earliest and biggest professional manufacturer of all kinds of wood-based panel machinery.
  
  Our featured products include:
  
  1 - Face veneer rotary peeling production line.
  
  2 - Face veneer slicer peeling production line.
  
  3 - Plywood complete production line.
  
  4 - Particleboard / chipboard production line.
  
  5 - MDF/HDF production line.
  
  6 - Melamine lamination hot pressing line.
  
  7 - LVL complete production line.
  
  We have two factories and one exporting company(Linyi Metro Int'l Trading Co, Ltd), our machines are widely used in more than 100 countries and helped customers to produce top quality wood based panels and occupy the good market.
  
  We can design and manufacture all specifications machines to meet customers' production demand, professional after-sales team consisted of 20 rich experienced engineers are ready for any countries for machines installation and debugging service.
  
  Welcome to visit our company, we will try our best to support your company.