Aak Hydraulic Flow Control Valves Were Still Normal After Being Used For 15 Months Near The Sea - China

Miguel is from a hydraulic equipment company in Brazil.

He began to purchase hydraulic components in China 3 years ago, and it was successful.

At the beginning of last year, the hydraulic flow control valves he purchased encountered problem and almost suffered a claim.

Since using AAK hydraulic flow control valves to replace, he knows that there are also hydraulic valve manufacturers in China that have benchmarked the quality of German manufacturers.

Miguel company sold a hydraulic unit, which was used in wind power generation equipment near the sea.

Half a year later, the customer complained that the valve body of the hydraulic flow control valve was seriously corroded and stuck, leading to the strike of the wind turbine generator.

According to the factory feedback of the original hydraulic flow control valves, the corrosion of the valve body is caused by the objective marine climate, the hydraulic flow control valves can only be replaced.

Miguel realized that replacing it within 6 months was not only expensive for after-sales, but also not necessarily acceptable to the customer.

He purchased the hydraulic flow control valves from Germany to replace it.

At the same time, he asked some new hydraulic valve manufacturers to make samples and required that the hydraulic flow control valves to be guaranteed for 12 months or more in the corrosive environment near the sea.

Most manufacturers gave up, and only two were willing to test samples, including AAK.

After 40 days, AAK shipped the trial order of 30 hydraulic flow control valves.

There has been no email from Miguel since the trial order was delivered.

15 months later, that is, last week, Miguel suddenly emailed us to purchase 800 hydraulic flow control valves.

After communication, we learned that they were very satisfied with AAK hydraulic flow control valve samples delivered 1 year ago.

The samples from another factory were corroded in 10 months, while AAK’s were still fine after 15 months.

This service life was benchmarked to the hydraulic flow control valves purchased from German manufacturers, but the price of AAK was 30% cheaper, so they directly placed a big order.

AAK hydraulic flow control valves can be used in highly corrosive marine environment for 15 months without damage.

The key lies in 3 points, which most domestic hydraulic valve manufacturers cannot do: 1 - In terms of material, 3Cr3Mo3W2V hot working die steel is selected for the valve body, and its mechanical stress is optimized by at least 50% compared with other steels.

After personalized heat treatment, the hardness, strength and corrosion resistance of the material are more than doubled.

2 - In terms of surface treatment, zinc nickel alloy coating is adopted, and the corrosion resistance of the valve body is improved again.

Its corrosion resistance is more than 10 times higher than that of ordinary zinc plating and nickel plating processes, which can ensure that there is no red rust after neutral salt spray test for more than 1500 hours.

3 - In terms of detection, AAK has SH-90 salt spray testing machine, which tests the valve body according to the GB/T2423.17 test standard to ensure that any surface of the valve body meets the salt spray test standard.

AAK hydraulic flow control valves are safe to use near the sea, and durable under high pressure and high frequency use.

You can also have a small try! AAK HYDRAULIC CARTRIDGE VALVES (302) 2022-07-29

Company Contact:

• Posted By: AAK Industry CO., LTD

• Phone: +8657483008115

• Address: Bona Business Building, No. 456 Taikang Middle Road,, Yinzhou, Ningbo, China, Ningbo , Zhejiang , China

• Email:

• Website: https://www.aakindustry.com/

• Business Description: Focused on the Development and Manufacturing of Hydraulic Valves since 2006, in Ningbo China
  
  Since its establishment 12 years ago, 6 first-line international brand importers have placed orders with AAK for 5 consecutive years, with a re-peat order rate of 62%.
  
  Exported to more than 20 countries, AAK Hydraulic Valves used on "AIRCRAFT" have been supplied to Russian customers.
  
  68%+ of the high precision hydraulic valves exported from Ningbo Port come from AAK hydraulic valves.