Aak Improved The Hydraulic Cartridge Directional Control Valve With Small Tips - China

AAK hydraulic cartridge directional control valve adopts a closed unit with 4 faces, which replaces the traditional 2 faces to connect the main flow.

The flow rate can reach 760L/min, while the pressure drop is less than 7bar, and the applicable pressure can reach 350bar.

It not only improves the stability of the hydraulic system, but also increases the energy consumption of the equipment by at least 20%.

Napoleon did not hesitate to give up the original hydraulic cartridge directional control valve manufacturer that had cooperated for 5 years, and chose AAK for the annual order.

For personalized customization, it does not only need to benchmark the manufacturing quality of first-line brands, but also need the team knowing 6 aspects, including design, materials, process, technology, production line control and testing.

Not a single one can be omitted.

However, most of the hydraulic valve manufacturers only have the production capacity according to the drawing, and use traditional technology to produce market goods, which is difficult to meet the personalized requirements of customized equipment.

Napoleon is from a hydraulic equipment manufacturing company in Italy.

Last year, he asked me about the technical parameters of a hydraulic cartridge directional control valve, then no further contact any more.

At the beginning of the year, they customized a hydraulic casting machine for a customer.

During debugging, they found that the stability of the equipment was not high, and the operation would lag after it was started.

Their engineer judged that the hydraulic cartridge directional control valve was unqualified.

Napoleon is very cautious in purchasing.

For this hydraulic cartridge directional control valve, he specially selected a supplier who has cooperated for 5 years to make samples.

The original manufacturer retested all parameters of the hydraulic cartridge directional control valve, but found no abnormality.

Napoleon guessed that the original design may have hidden dangers, but the original manufacturer has no ability to modify the design.

Napoleon came to me again and informed me of the current dilemma of the hydraulic cartridge directional control valve.

AAK engineer analyzed the drawings of the hydraulic cartridge directional control valve and the video of the equipment operation, judged that the original design had hidden dangers, and also had an improvement plan.

We suggest making samples directly.

After 45 days, AAK sent 10 samples of hydraulic cartridge directional control valves.

2 weeks later, Napoleon informed that after installing AAK hydraulic cartridge directional control valves, the hydraulic system of the hydraulic casting machine was stable.

After it was started, there was no lag, and the energy consumption of the equipment reduced by more than 20%.

Their customer was very satisfied.

Their company also plans to promote this hydraulic casting machine, and asked me to wait for the annual order for the hydraulic cartridge directional control valve.

The design of the original hydraulic cartridge directional control valve adopts the traditional closed unit with 2 sides, one side is connected with the main flow, and the other side is used for control.

The position of the closed unit can only be determined according to the pressure ratio between the main flow interface and the control oil interface, and the opening can only depend on the spring.

The hydraulic system of the customized equipment of customer is a little special.

When such a hydraulic cartridge directional valve is used on the equipment, it has an impact on the stability.

AAK hydraulic cartridge directional control valve adopts a 4 face closed unit, adds 2 independent control surfaces, and has an adjustable position "open valve" gear.

When closing the valve, there will be no delay, nor the force of the spring, to ensure no lag after opening.

AAK hydraulic cartridge directional control valve not only adds new functions, but also improves the original functions.

The flow rate can reach 760L/min, while the pressure drop is less than 7bar, and the applicable pressure can reach 350bar.

The hydraulic system of the equipment is stable, and the energy consumption is reduced by at least 20%.

AAK hydraulic cartridge directional control valve is customized, which is incomparable to the peers.

You can also have a small try! AAK HYDRAULIC CARTRIDGE VALVES (384) 2022-10-19

Company Contact:

• Posted By: AAK Industry CO., LTD

• Phone: +8657483008115

• Address: Bona Business Building, No. 456 Taikang Middle Road,, Yinzhou, Ningbo, China, Ningbo , Zhejiang , China

• Email:

• Website: https://www.aakindustry.com/

• Business Description: Focused on the Development and Manufacturing of Hydraulic Valves since 2006, in Ningbo China
  
  Since its establishment 12 years ago, 6 first-line international brand importers have placed orders with AAK for 5 consecutive years, with a re-peat order rate of 62%.
  
  Exported to more than 20 countries, AAK Hydraulic Valves used on "AIRCRAFT" have been supplied to Russian customers.
  
  68%+ of the high precision hydraulic valves exported from Ningbo Port come from AAK hydraulic valves.