Fuel Filter Element - China

Element is used in the gasoline or diesel fuel, and even used in the systems of LPG, effectively preventing the high-precision fuel system components of internal combustion engines from rapid wear.

These fuels contain pollution generated during production, as well as distribution.

Dust, rust from the inside walls of the tanks, water and living organisms in it can cause rapid wear of injectors, pumps or valves, pressure regulators, available in modern engines.

Therefore, in each fuel system filters are optimally adapted to the requirements of the engine, fuel quality, as well as the foreseen operating conditions.

Requirements for fuel filters are very high.

In modern engines require capture contaminants as small as 3.5 microns with an efficiency exceeding 90%.

In order to meet these requirements, in many cases installed in the fuel system of multiple fuel filter elements.

In this case, unlike the oil filter, for filtering the fuel valves are not by-pass, leaking fuel flow when the filter is clogged, as is the condition necessary to the combustion chamber gets only clean fuel.

Thus, it is better if the engine stops due to lack of fuel (clogged filter) than if he would have to work, eating unrefined fuel.

Company Contact:

• Posted By: Boegger Industrial Limited-filter element

• Phone: 863185111380

• Address: East Industrial Zone, Anping, Hebei, China., Hengshui , Hebei , China

• Email:

• Website: https://www.filter-element.org

• Business Description: Boegger manufactures the following types of filter elements:
  
  Hydraulic, designed to equip pressurized filters, filter drain and other hydraulic systems.
  
  Oil intended for lubricating systems, filters, complete machines and mechanisms in various industries.
  
  Fuel intended for the complete fuel filters vehicle engines.
  
  Aircraft designed for air filter assembly vehicle engines and compressors.
  
  Filter elements are manufactured with a nominal fineness of filtration:
  
  Paper - 05, 10, 25 and 40 microns
  
  Net - 40, 80, 120 and 160 microns
  
  Filter elements provide the highest degree of filtration efficiency for industrial, mobile, and process applications.
  
  Our filter elements are composed of micro-glass media, the most recent innovation in high performance filtration technology.
  
  Micro-glass media is inert, inorganic, and far exceeds any paper or cellulose filter element performance.
  
  Water or chemicals, which cause softening, swelling, and degradation in conventional cellulose or pleated paper filters, do not affect micro-glass media.
  
  The advantages of making filter element
  
  Filter elements and filters manufactured have a high technical specification through a number of structural and technological features, chief among them the use of modern materials quality, reliability and stability of the design process.
  
  The use of modern filter materials
  
  Effective is the one filter element, which not only removes dirt but also keeps them securely for the duration of the service.
  
  Depending on the material, the filter elements are divided into two main groups: surface and volume.
  
  Using of filter material has been a very stable structure.
  
  Enhanced binding of the fibers provides a stable bond between the fibers and increases the strength of the material under the influence of load versus load fluctuations of pressure and flow rate, temperature and aging.
  
  With this filter elements maintain its high performance during its entire life.
  
  The filter material is the most important component of the "filter" system with respect to prolonged life and wear protection of the system.
  
  Decisive criteria for the selection are the necessary degree of cleanliness of the operating medium, the initial pressure differential and the contamination retention capacity.
  
  Mount
  
  Fixing filtering curtains, adhesives and potting applied mass is crucial for the efficiency of the filter element.
  
  Through the use of supporting curtains made of nets in combination with one or more filtering curtains, achieved the desired filtration factor, which ensures effective protection of the host machine and increases the life of filter elements.
  
  Stiffness of the frame filter element is provided, where necessary, special reinforcing ring rolling or circular edges.
  
  The stability of the process
  
  The optimal form of corrugated filter media is possible only with a stable automated manufacturing process and strict compliance with technological standards.
  
  In the manufactured quality filter element secured the required number of corrugations, which allows to obtain the optimum filter area and the best performance.