High Toughness A2 Steel Spot Purchase Supply - China
price: 20.00 Dollar US$
The hardness of A2 is higher than SKD11 after heat treatment.
After tempering at high temperature (500-520℃), it can reach a high hardness of 60-62HRC, surpassing SKD11 in terms of strength.
A2 is an American high-toughness and wear-resistant tool steel, which is an air-hardened steel.
The mass fraction of carbon in this steel is about 1%.
After heat treatment, the hardness can reach 57~62HRC.
The mass fraction of chromium is about 5%.
After polishing, the steel surface has a darker gloss, excellent corrosion resistance, and extremely strong ductility.
The mold cutting edge has good damage resistance.
The steel has good hardenability, uniform carbide distribution, certain impact resistance and good wear resistance.
It has good air quenching performance, small dimensional deformation after air quenching, uniform and fine carbides, and good wear resistance.
Useful features:
(1) Good machinability and grindability.
The machinability and grindability are both better than SKD11, so the service life of processing tools is longer and the number of processing man-hours is saved.
(2) Advantages in heat treatment: The quenching hardening energy is higher than that of SKD11, so it can improve the defect of insufficient hardness during vacuum heat treatment.
(3) Advantages in wire cutting processing: High-temperature tempering can reduce residual stress and eliminate residual Waston iron, which can prevent cracks and deformation caused by wire cutting processing.
(4) Advantages of surface hardening treatment: The surface hardness after surface hardening treatment is higher than that of SKD11, so the mold performance can be improved.
(5) Advantages in repair welding operations Since the preheating and post-heating temperatures are lower than those of SKD11, the repair welding operations are easier.
Features: General cold work die steel, high hardness, high toughness.
Songshun specialized in Special Steel for almost 20 years.
We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.
Welcome your contact 24 hours a day!!!songshunsteel414043 401
Company Contact:
- Posted By: Dongguan Songshun Mould Steel Co., Ltd.
- Phone: 076985475596
- Address: 1st Floor, No. 1, Dongda Fourth Street, Shatou Community, Chang'an Town, Dongguan , Guangdong , China
- Email:
- Website: https://songshunsteel.com/
Published date: October 30, 2023
- Business Description: Established in 2009,Songshun Steel supplies a wide range of carbon, alloy and tool steel products, including high speed tool steel, cold work tool steel, hot work tool steel, plastic mould steel, engineering steel and machine structural steel etc.
After more than 10 years development and growing, Songshun Steel becomes one comprehensive special steel factory, stockist and exporter.
Combined with experienced exporting team and professional technical knowledge, Songshun Steel offers both technical advice and support, as well as global professional steel solution and service.
Due to satisfactory reliable quality and professional service, Songshun expands our market worldwide, such as Colombia, Chile, Spain, Turkey, Iran, Vietnam, Malaysia ,UAE, Canada, Brazil, Mexico and so on.
Songshun specialized in Special Steel for almost 20 years.
We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.
Welcome your contact 24 hours a day!!!
Skype/Whatsapp/We chat: +86-18269260283
Songshun Tiktok: mikizhuo
Songshun Facebook: Songshun Steel
Songshun YouTube: MiKi Zhuo
songshunmoldsteel414 04340
Related listings
-
Best Seling Jis Skd1 Steel Factory PriceMetal and mineral industries - Dongguan Songshun Mould Steel Co., Ltd. - China - October 30, 2023 - check with company for price
SKD1 Steel Application 1.Highly stressed cutting 2.Punching tools for thin sheet 3.Blanking and forming dies 4.Forming rolls 5.Drawing and deep drawing tools 6.Slitting Knife 7.Stone processing tools 8.Pressure pads 9.Thermosetting plastic molding SK...
-
Excellent Performance Din 1 2080 Steel PlateMetal and mineral industries - Dongguan Songshun Mould Steel Co., Ltd. - China - October 30, 2023 - check with company for price
German DIN standard 1.2080 cold work die steel, commonly known as D3 high carbon cold work die steel. 1.2080 steel has the following characteristics and applications: - High carbon content: The high carbon content of 1.2080 steel gives it high hardne...
-
High Wear Resistance Against Abrasive D3 Steel SupplyMetal and mineral industries - Dongguan Songshun Mould Steel Co., Ltd. - China - October 30, 2023 - 15.00 Dollar US$
D3 steel also knows as DIN 1.2080 and JIS SKD1, which is a 12% chrome alloy steel. JIS SKD1 steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensio...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"