Knowledge Of Aluminum Plate Processing And Use - China

Common knowledge of aluminum plate processing and use

1 - Aluminum plate handling: The four sides of the plate should be lifted at the same time when handling the plate.

Pushing, pulling, and extraction are strictly prohibited to avoid scratching the surface of the plate.

2 - Aluminum plate slotting: When slotting with a slotting machine or a gong machine, you should use a semi-circular head type milling cutter greater than 90 degrees.

The cutting tool should not be too deep to damage the aluminum plate, nor too shallow to make the hemming difficult, should be left A 0.2-0.3MM thick plastic core material is crimped together with the aluminum plate to increase the strength and toughness, otherwise the aluminum plate may break or the paint film may burst during the bending.

3 - Flanging of aluminum plate: uniform force is required when bending the edge, one-time forming, do not bend repeatedly, otherwise the aluminum plate may break.

4 - Aluminum plate arc processing: the processing arc should be processed with special bending equipment, slowly and hard, so that the plate gradually reaches the required curved surface.

Do not bend it at once.

5 - Aluminium plate batches: different batches of plates of the same model may have color differences.

When selling and using different batches of plates, the color difference comparison procedure should be added.

6 - Aluminum plate installation direction: when the same color aluminum plate is installed on the same plane, the process direction should be the same, otherwise it may cause visual chromatic aberration.

7 - Aluminum plate tearing film: The protective film should be removed within 45 days after the aluminum plate is installed, otherwise it may be difficult to tear the film or remove the glue.

8 - Conditions of use of aluminum panels: The interior wall panels should be used indoors, and should not be installed outdoors to ensure the use effect and service life.

How about the quality of 3004 aluminum plate?

Product status: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28 H112, H114, etc.

Common specifications: 0.1-500mm Application areas: color-coated aluminum substrates, heat sinks, cosmetic panels, ship materials, lamp cap materials, wide curtain wall panels, louver materials, lamp cap materials, decoration, packaging, printing, construction, transportation, electronics, etc.

Various industries, etc.

​ Processing technology: cold rolling | hot rolling

Company Contact:

• Posted By: Mingtai Aluminum

• Phone: 18538303430

• Address: No/6 Changchun Road , Zhengzhou , Henan , China

• Email:

• Business Description: Henan Mingtai Aluminum Co., Ltd. is a large-scale aluminum foil manufacturer in China, a listed company, and is the leading large-scale private aluminum foil production and export in Henan.
  
  The 8006 aluminum foil produced by the company has the advantages of high cup convex value, high heat sealing strength, no pinhole, good sealing, etc.
  
  It is especially suitable for the production of wrinkle-free lunch boxes.
  
  The only manufacturer that can produce high-end aerospace dining box aluminum foil, in addition, the quality of the 1 series, 3 series, 5 series, 8 series aluminum foil produced is also far ahead, and at the same time, it is the aluminum foil raw material for various aluminum lunch box manufacturers at home and abroad.
  
  Supplier.