Differential Scanning Calorimeter Dsc Oit Iso 11357 10837 - Turkey

DSC for determining the oxidation induction time for polymer pipe

and protective pipe systems as well as moulded elements made of

polyolefin.

Suitable for OIT test and Melting point determination

According to ASTM D***5 ISO7 EN**8 ASTM D***8 up to **0C

Including standard Tin, Ind pellets for calibration checkout, **0pcs of aluminium pans, Software CD (windows based software

including Report out to WORD), N2 and O2 rotameter mass flow

controller, Hoses and connectors, Software also has data export to

advantage Software for analysis, DSC measuring cell according to

the heat flux principle, temperature sensors for control &

sample temperature, Connection for Purge gas flow to the sample for

2 gas types, Temperature accuracy 0.1 C, Sensitivity: 3.6 to 4.0

μV/mW, Sensor Time constant: 2.5 s, calorimeter accuracy of ± 2%

and calorimetric precision of ± 0.5% or better, Two connections for

purge gas-Inlet to the sample & 1 connection for protective gas

Inlet with gas flow adjustment,

Company Contact:

• Posted By: AHP PLASTİK MAKİNA

• Phone: +902128725280

• Address: A Block, Perlavista Bld., Beylikduzu , Istanbul , Turkey

• Email:

• Website: https://ahp-makina.com.tr

• Business Description: AHP PLASTIK MAKINA is concentrating on making innovative solutions to assist testing process of plastic raw materials and finished products e.g. pipes, Fittings, Valves, Sheets, Films, etc.
  
  AHPAir­less Hydrostatic Pressure Unit is a Result of Innovative Thinking
  
  The Profes­sio­nalLi­ne model is the most innovative development in state-of-the-art internal pressure creep testers.
  
  Its compact design, flexibility and precision remain unparalleled.
  
  Keeping a finger on the pulse: The aim for the new development was to attain maximum accuracy, a long service life and a user-friendly system, along with flexibility to be able to expand the system with additional modules.
  
  High-precision pressure regulation.
  
  Selectively regulated input pressure in each individual module ensures reduced wear to the solenoid valves.
  
  Optimised ma­te­rial selection.
  
  All metal components that come in contact with the medium can optionally be manufactured out of high quality stainless steel.
  
  Room to grow: The modular structure and the technical requirement for test pressures, optionally up to maximum 600 bar leave room for further expansion.