Melt Flow Indexer Mfi - China

Introduction

Melt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products.

The fabric fusing tester is designed for use in the determination of the heat-resistant properties of chemical fiber and blended fabrics to determine the effect of fabric resistance to melt treatment.

This instrument is widely used in plastics raw material production plant, plastic products factory, petrochemical company and other industries as well as related colleges and universities, research institutes and quality inspection units.

Melt Flow Indexer conforms with GB/T9643, GB/T3682, JB/T5456, ISO1133 standards, and is designed in accordance with the GB/T3682-2000 and ASTM D1238-98 as well as JB/T5456, ISO1133 and similar standards for reference, used for determination of thermoplastics melt volume flow rate (MFR).

The melt mass flow rate applies automatic sampling weighed by the balance; Then the volume flow rate is calculated according to the formula.

The final result of the measurement is shown on the LCD screen of the instrument and output by the microtype printer.

Application Scope

Accuratemeasuring data, simple operation, intuitive and clear, stable and reliable performance.

It is suitable for fluorine plastic, nylon and other engineering plastics, and it can also be applied to polyethylene (PE), polypropylene (PP), polyformaldehyde (POM), polystyrene (PS) ABS resin, polycarbonate plastic with lower melting temperature.

It is widely used in plastic production, plastic products, petrochemical industry and related colleges and universities, scientific research units and commodity inspection organisation.

StandardsI

ISO 1133, ASTM D1238, GB/T3682 Features

1 - The heating rate is fast and the overshoot is very small

2 - High temperature accuracy

3 - After packing, the thermostat can be restored quickly

4 - Calibration of test parameters and correction of convenience

5 - Manual and automatic cutting test method can be adopted

6 - Liquid crystal display in Chinese

7 - Equipped with printer, automatic printout of test results Work Principle

The melt flow indexer is a plastic extruder.

Under the specified temperature condition, the heat furnace is used to melt the measured objects.

The measured objects in molten state is squeezed out through a certain diameter hole under the specified load.

In plastic production, the melting index is used to indicate the physical properties of polymer materials such as fluidity and viscosity in the melt state.

The so-called melt mass flow rate is the 10 minutes extrusion weight converted from the average weight of the extruded samples from different parts.

Technical Parameters

Items Parameters

Temperature range and accuracy 0 ℃ ~ 600 ℃, continuously adjustable, accuracy ± 1 ℃

Time accuracy 0.1s

Rush time 0 ~ 60s can be arbitrarily set

Steel ball specifications ¢ 8mm, weight 21g

Power supply AC220V 50Hz 500W

Dimensions 440mm × 275mm × 350mm (length × width × height)

Weight About 45Kg Standard test load (level 8) :

Level 1: 0.325 kg= (piston rod + weight tray + heat shield +No.

1 weight) =3.187N

Level 2: 1.200 kg=(0.325+ 0.875 No.

2 weight) =11.77 N

Level 3: 2.160 kg=(0.325+ 1.835 No.

3 weight) =21.18 N

Level 4: 3.800 kg=(0.325+ 3.475 No.

4 weight) =37.26 N

Level 5: 5.000 kg=(0.325+ 4.675 No.

5 weight) =49.03 N

Level 6: 10.000 kg=(0.325+4.675 No.

5 weight + 5.000 No.

6 weight) =98.07 N

Level 7: 12.500 kg=(0.325+ 4.675 No.

5 weight + 5.000 No.

6 weight+ 2.500 No.

7 weight) =122.58 N

Level 8: 21.600 kg= (0.325x 0.875 No.

2 weight + 1.835 No.

3 weight+ 3.475 No.

4 weight+ 4.675 No.

5 weight+5.000 No.

6 weight+2.500 No.

7 weight+ 2.915 No.

8 weight) =211.82 N

The relative deviation of test load is less than 0.5%.

Company Contact:

• Posted By: Qinsun Instruments (Shanghai) Co., Ltd.

• Phone: +862164200566

• Address: No. 2578 Minhang District Gu Dai Road, Shanghai, Shanghai , shanghai , China

• Email:

• Website: https://www.qinsun-lab.com

• Business Description: Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry.
  
  Qinsun specialize in the research and development of high quality lab instrument for textile testing industry.
  
  Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
  
  We have our own textile testing lab.
  
  Our textile testing methods and testing equipment are in the leading position in the industry and have passed the textile testing certification and iso textile testing standards issued by a number of testing.
  
  We always develop the highly sophisticated test instrument which can meet the various demands of the textile industry.
  
  We provide the upfront Micro weathering test equipments with our own brand name QINSUN, such as thermal resistance wet resistance meter, MMT(moisture management tester) etc, and the new functional test instrument include air permeability tester, hydrostatic head tester, thermal protection performance tester, as well as the widely used lab testing equipment such as textile washing color fastness tester, abrasion tester, pilling tester, rubbing color fastness tester, ironing tester and perspiration tester.
  
  For the laboratory requirements, we also bring forth the new practical test instruments.
  
  Qinsun products include: fabric test equipment, Textile Fabric Tester, fiber tester, yarn tester, carpet tester, non-woven fabric tester, toy tester, leather tester, automotive material test equipment and others.