Salt Spray Test Chamber - China

This equipment mainly used for simulating salt fog corrosion, testing the corrosion resistance test of products.

After anti-corrosion treatment on the various materials surface, including coating, electroplating, inorganic and organic film, anode processing, anti-rust oil, test performance in anticorrosion.

Technical Parameters

Test machine Temperature Scope

RT(Room Temperature)~55℃

Pressure Tank Temperature Scope

RT (Room Temperature) ~70℃

Brine temperature

35℃±1℃

Temperature Fluctuation

≤±0.5℃

Temperature Uniformity

≤±2℃

Temperature Deviation

≤±1℃

Spray Flow

1 ~ 2ML/80cm2 1hr (Based on mean value by 16

hour’s Gathering)

Relative Humidity

≥85% HR

Spray Pressure

1.00±0.01 kgf/cm2

PH

Neutral 6.5~7.2 /Acid 3.0~3.3

Specifications

Model No.

Internal Dimension (mm)

External Dimension (mm)

BE-CS-60

W600*H400*D450

W1070*H1180*D600

BE-CS-90

W900*H500*D600

W1310*H1280*D880

BE-CS-120

W1200*H500*D1000

W1900*H1300*D1400

BE-CS-160

W1600*H500*D1000

W2300*H1400*D1300

BE-CS-200

W2000*H500*D1200

W2700*H1500*D1500

Standard Complance

1 - ASTM B117 Salt Spray (Fog) Test

1 - ASTN D1654 Standard Test Method For Evaluation of Painted or Coated Specimens Subjected to Corrosive

2 - Environments

3 - ASTM D3359 Standard Test Methods for Measuring Adhesion By Tape Test

4 - JIS H8502 Methods of Corrosion Resistance Test For Metallic Coatings

5 - IEC 60068-2-11-1981 Basic Environmental Testing Procedures Part 2: Tests, Test Ka: Salt Mist

6 - IEC6802-52 1996 Environmental Testing-Part 2: Tests-Test Kb: Salt mist, cyclic (Sodium Chloride Solution)

7 - GJB 150.11A-2009 Laboratory Environmental Test Methods For Military Material- Part 11: Salt Fog Test

8 - CNS 4159 CASS Test-Copper Accelerated Acetic Acetic Acid Salt Spray (Fog) Test

9 - CNS 4158 Method of Salt Spray Fog Test for Surface Finishing

10 - MIL-STD810F Environmental Engineering Considerations and Laboratory Tests

11 - MIL-STD 202 Test Method Standard: Electronic and Electrical Component Parts

12 - MIL-STD 883 Test Method Standard: Microcircuits

13 - MIL-STD 1344 Test Methods For Electrical Connectors

14 - RTCA DO-160 Section 14 (Avionics) IEC 68 Part 2

15 - NEMA 250 Enclosures for Electrical Equipment

16 - SAE J2334 International Surface Vehicle Standard-Cosmetic Corrosion Lab Test

17 - SAE J 1211 Recommended Environmental Practices For Electronic Equipment Design

18 - GM 9540P General Motors Engineering Standards: Accelerated Corrosion Test

Features

With automatic / manual water supply system, can automatically add water when water shortage, do not interrupt test.

Temperature controller with digital display, PID control error ±0.1℃

Double overheating protection, water shortage warning

Adopting steam direct heating mode, heating speed and uniformity, reduce the standby time

With automatic/manual water system, water shortage will automatically added water, test don't interrupt., PID control error 0.1 ℃

Double over temperature protection, insufficient water level warning

Adopts steam heating mode directly, fast and uniform temperature rise, reduce the standby time

Company Contact:

• Posted By: Bell Experiment Equipment Co., Ltd

• Phone: +86 136 1276 1334

• Address: No. 11, Wusong 1st street, Yuwu, East City District, Dongguan , Guangdong , China

• Email:

• Website: https://belltestchamber.com

• Business Description: Our company is specialized in Battery Safety ( Performance ) Testing Equipment and Environment ( Climatic ) Reliable Test Chamber over ten years.
  
  And the machine is design and manufacture according to the relevant standards such as GB, GJB, IEC, ISO, MIL, DIN, CE, ASTM, UN, UL etc.