Uv Weather Resistance Test Chamber - China

UV weather resistance test chamber The UV weathering test chamber is mainly used to simulate the damage of sunlight, humidity and temperature to materials; material aging includes fading, loss of light, strength reduction, cracking, peeling, chalking and oxidation.

By simulating sunlight, condensation, and simulating natural humidity, the ultraviolet weather resistance test chamber can reproduce the damage that may occur outdoors for months or years by testing the samples in a simulated environment for several days or weeks.

In the U4000V ultraviolet accelerated aging test machine, the fluorescent ultraviolet of the ultraviolet lamp can reproduce the influence of sunlight, and the condensation and water spray system can reproduce the influence of rain and dew.

During the entire test cycle, the temperature is controllable.

The typical test cycle is usually ultraviolet light irradiation at high temperature and a dark and humid condensation cycle of 100% relative humidity; typical applications are paint coatings, automotive industry, plastic products, wood products, glue, etc.

Standards compliant 1 - GB/T14522-2008 Plastics, coatings and rubber materials used in mechanical industry products are used in artificial weathering and aging methods 2 - GB/T16585-1996 vulcanized rubber artificial weathering (fluorescent ultraviolet lamp) test method 3 - GB/T16422.3-2014 Laboratory Light Source Exposure Test Method Part 2: Fluorescent UV Lamp Ultraviolet rays in sunlight are the main factor that causes damage to the durability of most materials.

We use ultraviolet lamps to simulate the short-wave ultraviolet part of sunlight, which produces very little visible or infrared spectrum energy.

We can choose UV lamps with different wavelengths according to different test requirements, because each lamp has a different total ultraviolet radiation energy and wavelength.

Generally, UV lamps can be divided into two types: UVA and UVB.

In many outdoor environments, the material can be wet for up to 12 hours a day.

Studies have shown that the main cause of this outdoor humidity is dew, not rain.

The unique condensation function simulates outdoor moisture erosion.

In the condensation cycle during the test, the water in the reservoir at the bottom of the test chamber is heated to generate hot steam, which fills the entire test chamber.

The hot steam keeps the relative humidity in the test chamber at 100% and maintains a relatively high temperature.

The sample is fixed on the side wall of the test chamber, so that the test surface of the sample is exposed to the ambient air in the test chamber.

The outer side of the sample exposed to the natural environment has a cooling effect, resulting in a temperature difference between the inner and outer surfaces of the sample.

The appearance of this temperature difference causes the sample to have liquid water condensed on the test surface during the entire condensation cycle.

The spray system has 12 nozzles, 6 on each side of the test room; the spray system can run for a few minutes and then shut down.

This short-time spray of water can quickly cool the sample and create conditions for thermal shock.

Irradiation intensity control: optional Optional illumination intensity control options can get accurate and repeatable test results; the light intensity control system allows users to set different light intensity according to different test requirements.

Through its feedback loop device to precisely control the illumination intensity; at the same time, it can also extend the service life of the fluorescent lamp Temperature and humidity controller: technical parameter: The luminous spectrum energy of UVB-lamp tube is mainly concentrated between 280nm～315nm wavelength Control System Display Imported control instrument, simple operation, convenient setting, temperature control accuracy of 0.01℃, light, condensation, and spray can be freely switched QINSUN is an international manufacturer of textile testing equipment, which sells well in India, Pakistan, the United States, Britain and other places.

You can go to the website to get the machine parameters: PS: (WLJCDM809)

Company Contact:

• Posted By: Qinsun Instruments (Shanghai) Co., Ltd.

• Phone: +862164200566

• Address: No. 2578 Minhang District Gu Dai Road, Shanghai, Shanghai , shanghai , China

• Email:

• Website: https://www.qinsun-lab.com

• Business Description: Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry.
  
  Qinsun specialize in the research and development of high quality lab instrument for textile testing industry.
  
  Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
  
  We have our own textile testing lab.
  
  Our textile testing methods and testing equipment are in the leading position in the industry and have passed the textile testing certification and iso textile testing standards issued by a number of testing.
  
  We always develop the highly sophisticated test instrument which can meet the various demands of the textile industry.
  
  We provide the upfront Micro weathering test equipments with our own brand name QINSUN, such as thermal resistance wet resistance meter, MMT(moisture management tester) etc, and the new functional test instrument include air permeability tester, hydrostatic head tester, thermal protection performance tester, as well as the widely used lab testing equipment such as textile washing color fastness tester, abrasion tester, pilling tester, rubbing color fastness tester, ironing tester and perspiration tester.
  
  For the laboratory requirements, we also bring forth the new practical test instruments.
  
  Qinsun products include: fabric test equipment, Textile Fabric Tester, fiber tester, yarn tester, carpet tester, non-woven fabric tester, toy tester, leather tester, automotive material test equipment and others.