Devcon Brushable Ceramic Blue - India

Devcon Brushable Ceramic Blue

Description : Devcon Brushable Ceramic putty is brushable, high performance ceramic-filled epoxy for sealing, protecting and repairing surfaces subject to erosion.

Intended Use of Devcon Brushable Ceramic : Seal and protect new equipment exposed to erosion and corrosion; protect pump casings, impeller blades, gate valves, water boxes, and fan blades; rebuild heat exchangers, tube sheets, and other water circulating equipment; top coat for providing exceptionally smooth surface to repaired surfaces.

Features of Devcon Brushable Ceramic : Excellent chemical resistance, Temperature resistance to 350 Degrees F, Applies easily with short - bristle brush or roller, Low viscosity, self - leveling liquid.

Limitations of Devcon Brushable Ceramic : None

Features of Devcon Brushable Ceramic: Excellent chemical resistance, Temperature resistance to 350 oF, Applies easily with short - bristle brush or roller, Low viscosity, self - leveling liquid.

Limitations: None

Properties Devcon Brushable Ceramic :

Color - Blue

Mix Ratior by Volume 3.4: 1

Mix Ratior by Weight 5.6:

% Solids by Volume 100

Pot Life @ 75F 40

Specific Volume 16.5 in.

(3)/lb

Cured Shrinkage 0.0020 in.

/in

Specific Gravity 1.53 gm/cc

Temperature Resistance Wet : 150 Degrees Farenheight ; Dry: 350 Degrees Farenheight

Co eff of Thermal Expansion ASTM D 696

Coverage/lb 7.6 sq.

ft.

/lb mils ( 0.15in.

)

Cured Hardness 90D

Dielectric Strength 382 volts/mils

Dielectric Constant 3.87 @ 1 MHz

Adhesive Tensile Shear -2, 000 psi

Compressive Strength -15, 200 psi

Modulus of Elasticity - 9.0 psi x 10(5)

Flexural Strength - 8, 000 psi

Coefficient of Expansion Thermal 19 [(in.

) x (in).

x Degrees Farenheight) ] x 10 (-6)

Thermal Conductivity 1.92 [(cal x cm) x degree centigrade C)] x 10 (-3)

Brush Coat Thickness 10-20 mils (.

010-.

020 in.

)

Cure Time - 16 hrs

Recoat Time: 4-6 hrs

Salt Spray Resistance 5, 000 hrs

Mixed Viscosity 32, 000 cps

Chemical resistance of Devcon Brushable Ceramic is calculated with a 7 day, room temp.

cure ( 30 days immersion @ 70 degrees Degrees Farenheight )

Resistance to :

Benzene -Excellent

Sodium Hydroxide 10% - Excellent

Gasoline (Unleaded) - Excellent

Sodium Hydroxide 50% -Excellent

Hydrdegrees centigradehloric 10% - Very good

Sodium HypoChlorite- Very good

Kerosene - Excellent

Sulfuric 10% - Very good

Mineral Spirits - Excellent

Sulfuric 50% - Fair

Nitric 50% - Poor

Toluene - Excellent

Phosphoric10% - Very good

Xylene - Fair

Potassium Hydroxide 40% - Excellent

Devcon Titanium Putty, Devcon Plastic Steel Putty, Devcon Epoxy Putty, Plastic Steel Putty, Devcon Epoxy, Maintenance repair and Overhaul, INDUSTRIAL EPOXY PUTTIES, 180 Degrees Centigrade, ON LINE LEAK ARRESTOR, DEVCON, EPOXY PUTTY, BRUSHABLE CERAMIC, TITANIUM PUTTY, STEEL PUTTY, HIGH TEMPERATURE, RESISTANT, PUTTY, BELZONA 1111, BELZONA BRUSHABLE CERAMIC, BELOZONA EPOXY PUTTY, WURTH SILICON SPRAY, Instant Adhesive, Anti Corrosive Coating, Metal Repair Putties, Cold welding Compound, Bronze Putty, Wet Surface Putty, Abrasion Resistant Putty, Under water Putty, Devcon Plastic Steel Putty, Devcon 5 Minutes Epoxy Putty, Devcon 5 Minute Epoxy Putty, Devcon Stainless Steel Putty, Devcon Metal Magic Bond, Devcon Aluminum Putty, Machinable Putty, Easily Drilled Putty, Online Leak Arrestor, High temperature resistant leak arrestor.

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.