Devcon Plastic Steel 5 Minute Putty Sf - India

DEVCON Plastic Steel 5 Minute Putty SF

Description: Devcon Plastic Steel 5 Minute Putty is a Steel-filled, fast-setting epoxy putty for filling, and bonding metal surfaces.

Intended Use : Devcon Plastic Steel 5 Minute Putty Restores worn on fatiqued metals; patches castings; makes jigs and fixtures; rebuilds pump and valve bodies; restores bearing journals and races,

Devcon Plastic Steel 5 Minute PuttCan also stop online Leakages in Transformers, Pipes, Radiators Etc.

Devcon Plastic Steel 5 Minute Putty : Bonds to aluminum, concrete, and many other metals

Features of Devcon Plastic Steel 5 Minute Putty : It is Resistant to chemicals and most acids, bases, solvents, and alkalis.

Applies easily to vertical surfaces.

Limitations of Devcon Plastic Steel 5 Minute Putty : Machinable to metallic finish not recommended for long term exposure to concentrated acids or o organic solvents.

Typical : Technical data should be considered.

Physical Properties of Devcon Plastic Steel 5 Minute Putty : representative or typical only and should not be used for specification purposes.

Cured 7 days @ 70 degrees Degrees Farenheight

Devcon Plastic Steel 5 Minute Putty Color - Dark Grey

Devcon Plastic Steel 5 Minute Putty Mix Ratio by Volume - 1: 1

Devcon Plastic Steel 5 Minute Putty Mix Ratio by Weight - 1.7: 1

Devcon Plastic Steel 5 Minute Putty % Solids by Volume - 100

Devcon Plastic Steel 5 Minute Putty Pot Life @ - 75F 5min

Devcon Plastic Steel 5 Minute Putty Specific Volume - 12.2 in (3)/lb

Devcon Plastic Steel 5 Minute Putty Cured Shrinkage - 0.0006 in.

/in

Devcon Plastic Steel 5 Minute Putty Specific Gravity - 1.96 gm/cc

Devcon Plastic Steel 5 Minute Putty Temperature Resistance - Dry: 200degree centigrade F

Devcon Plastic Steel 5 Minute Putty Coverage/lb - 49 sq.

in.

/ lb.

½

Devcon Plastic Steel 5 Minute Putty Cured Hardness - 85D

Devcon Plastic Steel 5 Minute Putty Dielectric - 30

Devcon Plastic Steel 5 Minute Putty Strength - volts/mils

Devcon Plastic Steel 5 Minute Putty Dielectric Constant - 35

Devcon Plastic Steel 5 Minute Putty Adhesive Tensile Shear - 2, 026 psi

Devcon Plastic Steel 5 Minute Putty Compressive Strength - 10, 400 psi

Devcon Plastic Steel 5 Minute Putty Modulus Degrees Faren

Devcon Plastic Steel 5 Minute Putty Height Elasticity - 7.5 psi x 10(5) in

Devcon Plastic Steel 5 Minute Putty Flexural Strength - 7, 680 psi

Devcon Plastic Steel 5 Minute Putty Coefficient Thermal Expansion - 34 [(in.

) x (in).

x F)] x 10(-6)

Devcon Plastic Steel 5 Minute Putty Thermal - 2.65 [(cal x Conductivity cm) / (sec x cm(2) x C)] x 10 (-3)

Devcon Plastic Steel 5 Minute Putty Cure Time - 1 hrs

Devcon Plastic Steel 5 Minute Putty Recoat Time - 15-30 min

Devcon Plastic Steel 5 Minute Putty Mixed Viscosity - Putty

Tests Condected

Cure Shrinkage ASTM D 2566

Adhesive Tensile Shear ASTM D 1002

Dielectric Strength, volts/mil ASTM D 149

Co ef.

of Thermal Expansion ASTM D 696

Flexural Strength ASTM D 790

Thermal Conductivity ASTM C 177

Compressive Strength ASTM D 695

Cured Hardness Shore D ASTM D 2240

Dielectric Constant ASTM D 150

Modulus Elasticity ASTM D 638

Surface Preparation: 1 - Thoroughly clean the surface with Devcon Cleaner Blend 300 to remove all oil, grease, and dirt.

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.