Good Anti Sticking Friction Conveyor Idler Bearing 6305c3 C4 - China

Continuous working for more than 30 thousand hours ensured

Professional Commitment To Conveying Machinery Bearing

Integrity promise Connaught, intentions to do everything.

Export manufacturer

Our brand XKTE is a well-known brand in china in the manufacturers of conveying Bearing.

all of our products are made of Chrome Steel GCR15, with good anti-sticking, deep groove, large clearance for mining environment, and unique design for idler roller.

bearings also have a clearance value.

This provides the bearing room for expansion between the bearing races and will add a small amount of play between the two rings.

large clearance C3/C4 usually used in mining machine.


Professional brings quality, detail creates success

XKTE bearing’s most fundamental difference is:

The other manufacturers make products considering the price cheap, but we make products considering the service life.

Each of the idler roller bearings we produce is fully implemented in the national standard.

XKTE bearings exist for their quality and brand.

You can deny our price, but you can never find out our products’ defects in quality.

XKTE conveying machinery bearing, a big brand, is worthy of your trust.

1 - the identification of the bearing

Our manufacturer use laser engraving.

The stamps are deep, have significant dents with hand touch, good-looking, with no breakpoints, and are never disappeared.

2 - The use of bearing retainer

Nylon retainer has better anti-stuck performance and wider range of temperature than iron retainer.

In the underground its anti-static performance is also better.

3 - thickening ring

Our XKTE bearing uses way of thickening ring to get the standard of deep groove and large clearance, improves the anti-stuck performance, and effectively increases the service life.

4 - Bearing material and hardness

Material: High Carbon Chromium Bearing Steel (Fully quenched class) GCr15, hardness of idler roller bearing is 60-65 degree

5 - Grease selection of roller bearing

guaranteed by enough quality and quantity grease.

And this should also be taken into account of working in different seasons.

Our Advantage

1 - Excellent and high quality control

2 - Prompt delivery

3 - Long life and low noisy

3 - Competitive price and with avalible samples

4 - Small order accepted

5 - Customers' drawing or samples accepted

6 - OEM service

Reference:

The test and application after the instalation of the conveyor bearing

The instalation of the conveyor bearing must be done in dry and clean conditions.

Before the instalation, we must check whether the outer track and retainer of the conveyor bearing have any quality problem, and make sure polishing the burr produced when not being processed subtly of the conveyor bearing with sand paper.

Then wash over the burr and sand in the conveyor bearing with kerosene or solvent detergent.

And after drying it, we add grease into the conveyor bearing, thus we have finished the preparing work before the instalation.

Next we will adjust the clearance of the conveyor bearing, and after, we check the service behavior of the conveyor bearing´ work.

We can use our hands to rotate the principle axis to finish the job.

But it is different and more complex to instal the conveyor bearing to the big machinery.

It must start the machine to check whether the device runs normally after installing the conveyor bearing.

At this time, the temprature of the conveyor bearing begins increacing, if the temprature continues increasing after the conveyor bearing runs for one hour, it explains that it exists problem in the instalation, we must stop running the machine and check it over.

After excluding all the problems, we start the machine again, and after the rotate speed of the conveyor bearing achieving the rule for a while, if we find the temprature of the conveyor bearing stays stable, and do not appear noise, this shows that the conveyor bearing and the whole machine can run normally.

Package:

1 - Industrial packaging : Single box + outer carton + pallets

2 - Neutral Packing:

Tube package + outer carton + pallets

Tube package + middle box + outer carton + pallets

3 - As buyer's request

Payment methods:

1) TT, 30% deposit, 70% before shippment.

2) L/C at sight.

(high bank charge, not suggest, but acceptable )

3) 100% Western Union in advance.

(specially for air shipment or small amount)

Why choose us ?

1 - professional commitment to conveying machinery bearing, leading enterprise of conveyor

machinery bearing in China.

2 - With background of about 10 years

3 - Strict Inspection, and the best quality price with reasonable price bearings provided .

4 - OEM service provided.

5 - Delivery products from our factory warehouse, short delivery time.

Company Contact:

• Posted By: Shandong XinKaite Bearing Co., Ltd.

• Phone: +86-15688862750

• Address: Beixiaoxinzhuang W St., Jinan , shandong , China

• Email:

• Website: http://www.xinkaite.com

• Business Description: Shandong XinKaite Bearing Co.
  
  Ltd. is located in Yandian of Liaocheng in mainland China.
  
  Our company concentrates on manufacturing conveying machinery bearings, including conveyor idler bearing, KA bearing, spherical roller bearing, deep groove ball bearing, and also idler roller, idler roller accessories, and 0 class bearing.
  
  We enjoy high states in the industry because of our products high quality and low price, and professional stability.
  
  Supply Ability: 1000000 Pieces / per Month
  
  Started in 2006, formerly Shandong Guan County XinKai bearing Co.
  
  Ltd., our company relies on the Yandian professional bearing market, pushes the business to market domestic and abroad.
  
  And there are many long-term fixed partners of ours within the areas centered by conveying machinery bearing industry.
  
  With our companys gradually growing, from the rough to the bearing, we set up a one-stop production line, with a daily output of million sets.
  
  Thus to make our products have a very high market competitiveness.