Diamond Mesh Corner Bead - China

Expanded Metal Corner Beads for Stucco Rendering Designed with Mesh Wings

PuRuiSe is a China manufacturer of series expanded metal fabricated building materials including rib lath and corner beads for construction.

Corner bead is a kind of stucco render beads, available in Stainless Steel, Galvanized Steel, Aluminum or Plastic materials.

Also called casing bead, rendering bead or angle bead when applied to drywall angle forming.

We offer metal corner beads designed with nosing and mesh wings.

Processed from mainly expanded metal sheets.

Metal beads without rings also available.

Perforated metal beads also available upon request.

Popular type is Expanded Steel Corner Rendering Beads with Diamond Mesh Rings finished with hot dipped zinc coating or electro galvanizing.

This Expanded Metal Corner Bead has a smooth round nose bead with diamond mesh wings for the keying of plaster right up to the nose of the bead.

On the outside is the finished edge which is where one side of your drywall knife runs on when you are applying drywall mud.

The two flanges sit flat on your raw drywall.

The diamond decoration along the length of the flange acts as a keyway for holding the drywall mud to the drywall and the corner.

PVC / Plastic Corner Bead with fiberglass mesh is new type of corner beads used in inside and outside protection in building room corners and wall molding.

The square opening fiberglass mesh is flexible and strong with high tensile strength, can guarantee the corner of a wall direct-viewing felt, speeds up the construction speed.

Company Contact:

• Posted By: Anping PuRuiSe Expanded Metal Factory

• Phone: +86-318-9638287

• Address: No.33, Lingyuan Street, Anping, China, hebei , 053600 , China

• Email:

• Website: https://www.expanded-metal.org

• Business Description: Anping PuRuiSe Expanded Metal Factory is a supplier that is dedicated to producing high quality, precision made metal products.
  
  PuRuiSe has been in the expanded metal business for about 10 years to offer the best solutions for your needs.
  
  Many metals can be expanded including aluminium, pre-galvanised mild steel, mild steel hot rolled and cold rolled, stainless steel, zintec, monel, titanium, brass and copper.
  
  Special precious metals can also be processed to customers requirements including gold, silver and platinum.
  
  Expanded metal mesh is formed from a single piece of material with no waste in the process.
  
  The metal material is cut and stretched while still leaving it attached at the knuckle.
  
  This allows it to retain its shape when cut and cannot separate or fray.
  
  Often cutting to shape is the only fabrication needed.
  
  Because of its jointless continuity, it is a highly efficient conductor of electricity, magnetic flux and heat.
  
  It has excellent corrosion resistance when suitably coated, and the uncut knuckles support weight and withstand stress better than jointed welds or woven materials.
  
  Expanded mesh can be supplied in a variety of finishes, thickness, raised or flattened.
  
  Flattened is smoother and does not indent soft materials if this is a consideration but is not as strong as the more robust raised mesh.
  
  Powder coating in your choice of colour will enhance its aesthetic appearance and add to its corrosion resistance as would plastic coating.
  
  We can supply in framed panels made to customers specific requirementst.
  
  PuRuiSe has the most knowledgeable and professional staff working to provide the end user with a valuable and pleasant business experience.