Charcoal Briquette Equipment - China

The charcoal briquette equipment is mainly composed of four parts, the crusher, the dryer, the rod system, and the carbonization furnace.

After these equipment are assembled into a complete production line, the customer needs to grinder, tumble dryer, 60 rods.

The machine and the carbonization equipment should be inspected in detail to get the equipment into operation.

Raw material inspection is also an important step in the inspection of shuliy charcoal briquette equipment.

The humidity of the twig raw material is related to the production quality of the charcoal briquette equipment.

In theory, the humidity of the raw material is more suitable for 6%-15%.

The pulverizer performs pulverization treatment, and then the pulverized straw raw material enters the dryer for drying, and after reaching the rod requirement, it is sent to the rod making system for pre-forming, and enters the carbonization furnace for carbonization to produce high-quality straw charcoal.

The following four steps are to be carried out before the production of shuliy charcoal briquette equipment: 1 - The main engine of the charcoal briquette machine is commissioned.

When the operator confirms the power failure, the main shaft is rotated 2-5 times to see if the main engine rotates normally and the bite between the gears is tight.

2 - After confirming that the main engine of the charcoal briquette machine is rotating normally, connect the power supply, start the motor, see if the system is running stably, and whether the connection between the links is compact.

3 - Turn on the dust removal equipment to see if the air pump pressure is normal, whether there is air leakage or unstable air pressure.

4 - Put a small amount of raw materials for pre-production, carefully check whether the quality of charcoal is qualified, and if it is not qualified, analyze which part of the problem is solved and solve it in time.

Performance of charcoal briquette equipment: 1 - Pressure roller automatic adjustment function: The pressure angle is automatically adjusted by the principle of two-way rotation of the thrust bearing so that the material is not crowded and not boring, and the stability of the discharge molding is ensured.

2 - Simple operation and convenient use: high degree of automation, less labor, only 3 people, using manual feeding or conveyor feeding.

3 - Applicability of materials: It is suitable for the molding of various biomass materials.

The length of branches is from powder to 50mm, and the water content is between 5-30%.

4 - Electric heating function: Fully automatic electric heating device, which can adjust the dry humidity of materials to solve the problem of blockage and non-forming; 5 - High production capacity, low price and low power consumption.

Company Contact:

• Posted By: Zhengzhou Shuliy Machinery Co., Ltd

• Phone: 086 17303831295

• Address: Ninth Street, Zhengzhou , Henan , China

• Email:

• Website: https://fiberrecycling.com/

• Business Description: Mainly export some agricultural machinery and environmentally friendly machinery Zhengzhou Shuliy Machinery Co., Ltd is a well-known enterprise that integrates scientific research, development, design, manufacturing and sales as a whole.
  
  It is located in Zhengzhou Economic and Technological Development Zone, which is a commercial and economic center, mainly engaging in the import and export of mechanical equipment .
  
  Here is empowered with more than 300 employees all motivated with the joy of working as a family.