217 visiting now: 189 USA USA flag 17 Belgium Belgium flag 4 Canada Canada flag 3 Sweden Sweden flag 3 UK UK flag 1 France France flag 1 Hong Kong Hong Kong flag 1 Ireland Ireland flag 1 Australia Australia flag

Highlighted Companies

Din 1 2738 Plastic Mold Steel Nitriding Treatment Technology - China

price: 523.00 Dollar US$

Hardening treatment and nitriding treatment are one of the important process technologies to improve the performance and quality of 1.2738 plastic mold steel.

Today, the continuous improvement of these two technologies can significantly improve the hardness, strength, wear resistance, service life and other properties of 1.2738 steel, which can make DIN 1.2738 steel play a greater role in practical applications.

Hardening Treatment

(1) Hardening Treatment Technology

The hardening treatment of 1.2738 plastic mold steel is mainly achieved through heating, insulation, cooling, increasing the carbon content in the steel, and flame hardening.

Hardening treatment is achieved by heating 1.2738 steel above the critical temperature, controlling temperature and time to dissolve carbon atoms in the steel into the grains, forming an austenitic structure, and then rapidly cooling to cause phase transformation in the microstructure, thereby obtaining the high hardness surface and required microstructure of 1.2738 plastic mold steel.

Flame hardening is the rapid heating of DIN 1.2738 steel by direct exposure to a hot gas flame.

After hardening, the wear resistance, corrosion resistance and tensile resistance of 1.2738 are also improved.

Hardened 1.2738 die steel can be used to manufacture key components such as aircraft engines and high-speed train traction motors.

(2) Problems Needing Attention During Hardening Treatment

1 - Control carbon content: appropriate carbon content can increase the hardness of 1.2738 plastic mold steel, but too low carbon content will lead to poor hardening effect, unable to fully form martensitic structure, thereby affecting the hardness of steel; too high carbon content The content will easily lead to brittleness, which will increase the risk of cracking during quenching, thereby affecting the toughness and strength of the steel.

Therefore, the carbon content of 1.2738 steel needs to be strictly controlled before hardening treatment.

2 - Temperature control: During the hardening process, if the heating temperature is too high, the grains will grow and affect the toughness of the steel; if the heating temperature is too low, the carbon atoms cannot be fully dissolved into the grains, thereby affecting the hardness.

At the same time, it is necessary to keep the temperature uniform and stable to avoid local overheating or overcooling.

3 - Cooling rate: Controlling the cooling rate of 1.2738 plastic mold steel is the key factor to ensure the hardening effect.

Cooling is usually carried out by oil quenching, water quenching or air cooling.

If the speed is too slow, austenite will transform into pearlite or bainite, thereby affecting the hardness; if the speed is too fast, it may cause stress concentration and cracking.

Therefore, when selecting the cooling medium and cooling method, it is necessary to make reasonable adjustments according to the specific situation and hardness requirements.

To sum up, hardening treatment and nitriding treatment have a significant impact on the performance of 1.2738 plastic mold steel, which can improve its surface hardness, strength, wear resistance and corrosion resistance, etc.

In Songshun, we often use hardening treatment and nitriding treatment in combination, which can make 1.2738 steel have better performance and prolong its service life, so as to provide customers with the best mold steel.

songshunsteel414043 401


Company Contact:


  • Phone: 076985475596

  • Address: 1st Floor, No. 1, Dongda Fourth Street, Shatou Community, Chang'an Town, Dongguan , Guangdong , China

  • Email: Email


Published date: July 31, 2023

  • Business Description: Established in 2009,Songshun Steel supplies a wide range of carbon, alloy and tool steel products, including high speed tool steel, cold work tool steel, hot work tool steel, plastic mould steel, engineering steel and machine structural steel etc.

    After more than 10 years development and growing, Songshun Steel becomes one comprehensive special steel factory, stockist and exporter.

    Combined with experienced exporting team and professional technical knowledge, Songshun Steel offers both technical advice and support, as well as global professional steel solution and service.

    Due to satisfactory reliable quality and professional service, Songshun expands our market worldwide, such as Colombia, Chile, Spain, Turkey, Iran, Vietnam, Malaysia ,UAE, Canada, Brazil, Mexico and so on.

    Songshun specialized in Special Steel for almost 20 years.

    We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.

    Welcome your contact 24 hours a day!!!

    Skype/Whatsapp/We chat: +86-18269260283

    Songshun Tiktok: mikizhuo

    Songshun Facebook: Songshun Steel

    Songshun YouTube: MiKi Zhuo

    songshunmoldsteel414 04340

Related listings



  • Aisi 12l14 Steel Round Bar Sheet Plate Jis Sum24l Din 1 0718
    Aisi 12l14 Steel Round Bar Sheet Plate Jis Sum24l Din 1 0718
    Moldings - Dongguan Songshun Mould Steel Co., Ltd. - China - April 23, 2023 - check with company for price

    AISI 12L14 has great machinability and is suitable for case hardening and electroplating. It also is called automatic machine tool processing steel. It is used for machining automation and production line. It is mainly used for small force and strict...

  • Plastic Mold 718h Steel Sheet Plate Material
    Plastic Mold 718h Steel Sheet Plate Material
    Moldings - Dongguan Songshun Mould Steel Co., Ltd. - China - February 2, 2023 - 450.00 Dollar US$

    my country's GB standard steel number 3Cr2NiMo; German DIN standard material steel number 2738; Swedish ASSAB standard steel number 718; American AISI/SAE standard steel number P20 optimization; Japanese JS standard steel number SNCM optimization; In...

  • China Factory 65mn Steel Round Bars Price
    China Factory 65mn Steel Round Bars Price
    Moldings - Dongguan Songshun Mould Steel Co., Ltd. - China - February 2, 2023 - contact company for price

    Annealing specification In the traditional periodic spheroidizing annealing process, the annealing temperature is 750°C, heat preservation for 2 hours, furnace cooling to (680±10)°C, heat preservation for 3 hours, and then furnace cooling to 550°C, t...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"