Commercial Uv Sterilizer - China

How is the performance of a uv disinfection device determined?

the main ways uv device companies to substantiate performance are listed below:

dose-response models, where uv-dose is measured, then used to estimate device effectiveness in hospitals.

tests conducted in microbiology labs, where rate-of-kill is measured for various pathogens under tightly controlled conditions.

environmental effectiveness tests, where hospital rooms are swabbed before and after uv treatment.

uv sterilizer malaysia

clinical outcome studies, where reduction in infection rates resulting from uv device usage is calculated.

not all effectiveness data is equally reliable.

the remainder of the article describes each category in detail, as it relates to marketing and use of uv room disinfection devices.

mathematical dose-response models and uv dose-meters (dosimeters)

generally speaking, uv disinfection machine is a function of uv dose.

the correlation is "log-linear, " meaning a line is formed when microbial populations are plotted on a logarithmic scale at various treatment intervals.

for instance, if a study were to begin with one million microorganisms on a test surface, it might show 100, 000, then 10, 000, then 1, 000 viable cells after being treated with uv light for 10, 20, and 30 minutes.

ultraviolet sterilizer-knock

the straightforward relationship between uv dose and disinfection is a blessing and a curse: it enables smart uv companies to build accurate dose-response models for their machines, but fools less sophisticated uv companies into thinking that no laboratory testing is necessary so long as they have a way to measure or estimate uv dose.

uv dosimeters have found a variety of uses in uv room disinfection.

some companies use uv dosimeters to "prove" their device has disinfected a room.

other companies use uv dosimeters to tell the device when to turn off.

uv dosimeters are most accurate when used to measure narrow-spectrum uv light, the kind of uv light that mercury bulbs produce.

dosimeters are not useful to measure high-intensity broad-spectrum uv light, since the brief pulses of broad-spectrum light exceed the measurement capacity of most dosimeters.

predictions based on uv dose measurements are only as accurate as the dose-response model used to make the prediction.

the use of data from even slightly dissimilar studies (different device, different bulb, different surface type, etc) can render predictions unreliable.

therefore, extra scrutiny should be applied to claims of effectiveness based solely on dose-response modeling, especially if the source data that serves as the basis for the model was taken from previous, unrelated studies.

if you are considering the purchase of a uv room disinfection device based on a company's uv dosimetry data, please read more on mathematical dose-response models for antimicrobial efficacy.

Company Contact:

• Posted By: Jiangsu Knock Medical Technology Co.,Ltd

• Phone: 13606124811

• Address: CHTC Floor 6, No.9-1 Taihu East Road, Changzhou , Jiangsu , China

• Email:

• Website: https://www.k-nock.com/

• Business Description: Jiangsu Knock Medical Technology Co., Ltd. was established in 2020 - The company integrates all aspects of chip epitaxy, chip packaging, ultraviolet light sensor, IC design, light source system integration, etc.
  
  It is a high-tech company focused on the development of UVC chip technology and deep ultraviolet LED sterilization developing and manufacturing anti-virus application products.
  
  The company has an excellent scientific research team, and has obtained strong technical support from well-known medical experts, national "Thousand Talents Plan" experts, and the doctoral team of the Chinese Academy of Sciences.
  
  Based on the ultraviolet sterilization principle that destroys and changes the DNA or RNA structure of microorganisms through the irradiation of deep ultraviolet LEDs, so that virus bacteria immediately die or cannot reproduce offspring, and at the same time avoid the pollution and harm caused by mercury leakage in traditional ultraviolet lamps.
  
  KNOCK innovatively adopts LED deep ultraviolet lamp source, after continuous research and development, a series of equipment and modules for sterilization and anti-virus for various application environments come out.
  
  It can be used directly as a terminal product for customers, or can be integrated in other product with OEM/ODM service.
  
  Because UVC LED sterilization and disinfection is a pure physical disinfection method, unlike chemicals, it is not affected by chemical balance conditions such as temperature, concentration, activity, and no secondary pollution; it has low power consumption, low heat, and long service life; broader spectrum for sterilization; flexible appearance, small volume and weight, easy to install and carry.
  
  The product has a wide range of application fields, suitable for public places, hospitals, schools, food processing industry, catering industry, institutions, enterprises, families and other places.
  
  The product series cover medical-grade sterilization and anti-virus equipment, testing equipment, water purification systems, air purification systems, air-conditioning systems, household appliances and other built-in sterilization, portable sterilizers, etc.