Manufacture Aisi 5140 Material Mold Design And Use Precautions - China

Precautions for using AISI 5140 material Mold design: When designing stamping dies, the performance characteristics of AISI 5140 material should be fully considered.

For example, the shape and size of the mold should be reasonably designed according to the stress conditions of the mold to avoid stress concentration areas.

For some places where stress concentration is prone to occur, the stress distribution can be improved by increasing the fillet radius, setting reinforcing ribs, etc., to increase the service life of the mold.

Precautions during processing: When processing AISI 5140 material, attention should be paid to the selection of tools and the reasonable setting of cutting parameters.

Since the strength and hardness of 5140 steel are relatively high, the tool is easy to wear during cutting.

Therefore, suitable tool materials should be selected, such as carbide tools, and parameters such as cutting speed, feed rate and cutting depth should be reasonably adjusted to improve processing efficiency and processing quality.

At the same time, attention should be paid to cooling and lubrication during processing to reduce tool wear and workpiece surface roughness.

Heat treatment quality control: Heat treatment is a key link to ensure the performance of AISI 5140 material, and heat treatment process parameters must be strictly controlled.

During the quenching process, the accuracy of the quenching temperature and the uniformity of the quenching medium must be ensured to avoid problems such as quenching cracks and insufficient hardness.

During the tempering process, the accuracy of the tempering temperature and the adequacy of the holding time must be ensured to obtain good comprehensive performance.

SONGSHUN STEEL

We provide one-stop and all-round services such as precise cutting, heat treatment, grinding, and machining.

Always putting customers at the center, we make your production more efficient and worry-free.

Company Contact:

• Posted By: Dongguan Songshun Mould Steel Co., Ltd.

• Phone: 076985475596

• Address: 1st Floor, No. 1, Dongda Fourth Street, Shatou Community, Chang'an Town, Dongguan , Guangdong , China

• Email:

• Website: https://songshunsteel.com/

• Business Description: Established in 2009,Songshun Steel supplies a wide range of carbon, alloy and tool steel products, including high speed tool steel, cold work tool steel, hot work tool steel, plastic mould steel, engineering steel and machine structural steel etc.
  
  After more than 10 years development and growing, Songshun Steel becomes one comprehensive special steel factory, stockist and exporter.
  
  Combined with experienced exporting team and professional technical knowledge, Songshun Steel offers both technical advice and support, as well as global professional steel solution and service.
  
  Due to satisfactory reliable quality and professional service, Songshun expands our market worldwide, such as Colombia, Chile, Spain, Turkey, Iran, Vietnam, Malaysia ,UAE, Canada, Brazil, Mexico and so on.
  
  Songshun specialized in Special Steel for almost 20 years.
  
  We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.
  
  Welcome your contact 24 hours a day!!!
  
  Skype/Whatsapp/We chat: +86-18269260283
  
  Songshun Tiktok: mikizhuo
  
  Songshun Facebook: Songshun Steel
  
  Songshun YouTube: MiKi Zhuo
  
  songshunmoldsteel414 04340