Fully Continuous Scrap Tyre Crumbs Waste Rubber Pyrolysis Project Plant 50tpd - China

Most Advanced Tyre Pyrolysis Plant 1 Set

Application: Waste tyre to oil

Advantages: full auto, continuous production, save labour and energy, environmental

Model#: BJ &1.6m*13m*2 reactors

Capacity: 50TPD

Unique Technology Advantage

1, Advanced Energy Saving Technology of Cycle Heating Internal and External

The basis of energy saving technology lies in: the fuel is directly heated in the "internal reactor", which can transfers heat energy equally to the reactor all around in 360 degree.

The heating efficiency is two or three times more than the way of heating at the bottom of the reactor only.

Meanwhile, the material is distributed on the surface of the "internal reactor in 360 degrees ", with large area of heat absorption, and the heat energy is fully absorbed in the "internal reactor ".

At the same time, the heat energy of the "internal reactor" is circulated to heating stove of "external reactor" and heat to reactor.

The heat energy is transmitted to the "material preheater" again after secondary utilization and then preheat materials.

Thrice use like this, especially both heat absorption and heat release evenly all around of internal reactor, heat utilization increases 3-4 times.

2, Advanced Continuous Operation Technology

Continuous production must be completed jointly in three basic links, namely uninterrupted feeding, continuous slag discharge and uninterrupted oiland gas discharge.

In particular, continuous feeding and continuous slag discharge are two key technologies, which are the core technologies related to the real uninterrupted production.

Because feeding can not be continuous if slag could not be discharged in time.

Then it can not realized continuous running if without continuous slag discharge.

The key technology lies in our design of "automatic gas seal feeding, slag discharge method" which belongs to our company's proprietary and patented technology.

Thus, in high temperature condition, feeding material can be push into reactor, then slag discharge out of reactor, meanwhile hydrocarbone can continuously fractionate out of the reactor to achieve completely continuous production of feeding, slag discharge, oil producing in one production line, greatly improving the production efficiency and environmental protection effect.

3, Advanced Automatic Decoking Removal Technology

At present, the biggest problem for continuous production of rotary reactor is thick coke will be formed continuously when feeding materials are affected by high temperature in the reactor, which not only makes the reaction unable to proceed, but also damages the equipment quickly.

The company invented a series of automatic decoking devices, such as"Plate decoking method";"Shoveling pushing decoking method";"Friction decoking method", etc, which can constantly remove the coke in the reactor to ensure the continuous reaction and greatly extend the life of the equipment, completely solve the problem of materials (especially plastic and liquid raw materials) in the running of reactor.

Important data: Oil content of carbon black from our plant: 0.3%.

Good quality carbon black sells at good price.

4, Advanced Catalytic Cracking Technology in Low Temperature

Generally, low technology enterprises adopt simple heating pyrolysis method for oil refining, and many recombinant fractions higher than the molecular weight of diesel 220 which will fail to be pyrolyzed and cannot be converted into qualified fuel oil.

Our company adopts "Precious Oil" series of conversion agents to depolymerize macromolecules and harmful substances in reactor.

At the same time, deep cracking agent was used in the special fixed bed catalytic tower to further crack macromolecules and maximaly improve the oil recycling rate.

Moreover, the end oil has better quality with less colloid and asphaltene.

Due to the effect of catalyst, the temperature of pyrolysis is reduced, there is no coking in the equipment, so the quality of carbon black good.

5, Advanced Sulfer Removal Technology

In the tire reaction, with new sulphur-fixative added into the reactor, sulfide of feeding material will solidify through complexation and gasified sulfide will be absorbed, thereby to prevent sulfide emission into the end oil and around air.

Company Contact:

• Posted By: Hunan Benji Environmental Energy Technology Co.,LTD

• Phone: 18166261800

• Address: No.9th Hengfu Road,Anfu Industry Park,Linli,Changde City,Hunan Province, Changde , China

• Email:

• Business Description: manufacturer:
  
  fully continuous tyre pyrolysis plant,tyre recycling plant,waste plastic recycling plant,waste plastic recycling machinary