Exceptional Performance Thermal Gel For Smartphone Cooling - China

Most of competitive products are similar to thermal silicone grease with a short service life, one or two years.

Rivals’ thermal gel will volatilize and cure, causing thermal conducting failure.

GLPOLY thermal gel features ultra low thermal resistance, non-cure, non-drip off, just few of thermal management materials suppliers can make it.

this is not bragging but truth.

A smartphone manufacturer contacted me and consulted about thermal interface materials with thermal conductivity of 3.0W/mK or higher and 5-year service life.

As precise devices require high thermal performance and paste materials provide higher performance than solid ones, we recommended XK-G30 thermal gel to customer.

But customer reply rapidly with doubt, “is thermal gel workable? We are using a thermal gel in our products, it performance well at the beginning, but we need to repair it once a year when it cures and fail to perform.

” This customer used a famous brand in Shenzhen.

We knew about this situation much, the thermal gel will cure like thermal silicone grease in one year, and it drips off polluting other components.

I assured customer that GLPOLY thermal gel will not cure in six years and it provdes a longer life than device’s.

I suggested customer make an accelerated aging test to shorten design cycle.

Customer accepted my suggestion and fixed test conditions: high temperture 150 degree centigrade, 720 hours, changes were within 5%.

Comparing with rival’s changes of 10%, GLPOLY’s standard is much more rigorous.

One month later, customer opened test chamber and found that GLPOLY XK-G30 thermal gel remained paste status.

Performance test showed that changes of thermal conductivity and thermal impedance were less than 3%.

“this is the best what I had test ever.

” GLPOLY XK-G30 had been listed in customer’s supplier system.

There is no quality complaint for nine consecutive years.

GLPOLY XK-G30 thermal gel provides ultra low thermal impedance of 0.001℃in2/W, it wets out interfaces decreasing contact thermal resistance.

XK-G30 had been verified by the third party for shocking test and aging test.

Now GLPOLY is a qualified partner to DJI, ZTE and GAC Auto.

If there is only one supplier that can sovle your thermal management problems, it would be GLPOLY.

Company Contact:

• Posted By: Goldlink Tongda Electronics Co., Ltd

• Phone: +8675527579310

• Address: Block 45, Baoan Shenzhen China, Shenzhen , Guangdong , China

• Email:

• Website: https://www.glpoly.com

• Business Description: Goldlink Tongda Electronics Co., Ltd is committed to the design, development and manufacture of Thermal Interface Materials, developing high quality TIMs and Thermal Solution is our first priority.
  
  Our outstanding R&D team are able to deliver the effective thermal solutions to customers for facing current advanced products.
  
  Products
  
  Busin ess includes Thermal Silicone Pad, Silicone Putty Pad, Thermal Tape, Thermal Silicone Grease, Two-part Thermal Gap Filler, Thermal Gel, Phase Change Materials and Non-Silicone based products.
  
  
  
  Applications
  
  We serve a multitude of industries worldwide including New energy vehicles, UAV, computer, telecommunications, consumer electronics, optical products, LED lighting, air flight, storage device, military and medical equipment, power conversion.